background image

26 English

Disposal of Old Equipment

Only for European Union and countries with recycling systems

This symbol on the products, packaging, and/or accompanying documents mean that used

electrical and electronic products must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take

them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any

potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of 

disposal.

Trademark Credits

 •HDMI, High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI 

Licensing Administrator, Inc. in the United States and other countries.

 •USB Type-C and USB-C are trademarks or registered trademarks of USB Implementers Forum.

 •PressIT is a trademark of Panasonic Corporation.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully 

respected.

Notice (U.S.A. only)

Disposal may be regulated in your community due to environmental considerations. For disposal or 

recycling information, please visit Panasonic website:  

https://www.panasonic.com/us/corporate/sustainability.html  

or call 1-888-769-0149.

Содержание PressIT TY-WPSC1




























Отзывы: