Panasonic PressIT TY-WPSC1 Скачать руководство пользователя

Страница: 23 / 27

English

FCC STATEMENT

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

⿟

Reorient or relocate the receiving antenna.

⿟

Increase the separation between the equipment and

receiver.

⿟

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

⿟

Consult the dealer or an experienced technician for help.

FCC CAUTION:

To assure continued compliance, follow the attached

installation instructions and use only the provided

power supply cord. Any changes or modifications

not expressly approved by Panasonic Corp. of North

America could void the user’s authority to operate

this device.

FCC RF Exposure Warning:

⿟

This transmitter complies with FCC radiation

exposure limits set forth for an uncontrolled

environment for mobile use with minimum 8 inches

(20 cm) spacing requirement between transmitter and

all person’s body (excluding extremities of hands,

wrist and feet) during wireless modes of operation.

<Only for wireless LAN if capable of transmission in the

5.18 ~ 5.24 GHz frequency band>

This product is restricted to indoor use due to its

operation in the 5.18 to 5.24 GHz frequency range.
Supplier’s Declaration of Conformity

Model No.

TY-WPR1, TY-WPB1, TY-WPBC1

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, New Jersey

07102-5490

Contact Source:

Panasonic System Solutions Company of North

America

1-877-655-2357

General Contact:

http://shop.panasonic.com/support

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

Содержание PressIT TY-WPSC1




























Результаты поиска

Содержание PressIT TY-WPSC1

Отзывы:

Похожие инструкции для PressIT TY-WPSC1

Бренды по названию

Популярные бренды

Panasonic PressIT TY-WPSC1, Руководство по эксплуатации

Результаты поиска

Содержание PressIT TY-WPSC1

Отзывы:

Похожие инструкции для PressIT TY-WPSC1

Бренды по названию

Популярные бренды