14 English
14
Installation of the receiver board
The installation instruction below is based on the flat panel display SQ1 series as an example.
For attaching or removing this product to or from the flat panel display unit, it is recommended to ask a qualified
technician or sales dealer. A malfunction may occur due to static electricity, etc. Consult the sales dealer.
Follow the steps below.
Note
•Be sure to turn off the display unit and connected devices, remove the power plug from the socket, and disconnect
the cables from the display.
•When attaching/removing the receiver board, do not allow the metal to damage the back cover or display label.
1
Remove one screw from the side with the guide on the SLOT adaptor.
SLOT adapter
Screw
Guide
2
Fit the circuit board of the receiver board in the guides of the SLOT adaptor, and
bring the circuit board into contact with the hook (one location) and the end faces
(two locations) securely.
Receiver board
Hook
End face
End face
