Panasonic PN28080i, Руководство по эксплуатации

Страница: 286 / 442

286
the client to reattempt authentication.
The factory default setting is 30 seconds.
Supplicant Timeout Displays the timeout for the client.
The factory default setting is 30 seconds.
Server Timeout Displays the timeout for the authentication server.
The factory default setting is 30 seconds.
Maximum Request The maximum number of times of retransmitting
an authentication request.
The factory default setting is 2.
Quiet Period The number of seconds to wait before
reattempting a failed authentication.
The factory default setting is 60 seconds.
Re-auth Period The periodic re-authentication time interval.
The factory default setting is 3600 seconds.
Per Port Re-auth Displays whether periodic re-authentication is
enabled or disabled.
Enabled Re-authentication is performed
periodically.
Disabled Periodic re-authentication is not
performed. (factory default setting)
OperControlDirection Displays the operation status at the time of
authentication request.
Both
In an unauthorized status, the packet
transmission/reception is not executed.
In In an unauthorized status, the packet
reception is not executed.
AdminControlDirecti
on Displays the operation configuration at the time of
authentication request.
Both
In an unauthorized status, the packet
transmission/reception is not executed.
In In an unauthorized status, the packet
reception is not executed.
Current PVID Displays the PVID currently applied.
Guest VLAN ID Displays VLAN ID applied in an unauthorized
status.
Displays "----" when it is disabled.
Default VLAN ID Displays VLAN ID assigned when no VLAN
information was notified by RADIUS server while
Dynamic VLAN is enabled.
Displays "----" when it is disabled.
Re-Auth Timer Mode Displays whether this value is used or not when
Session-Timeout Attribute was notified by RADIUS
server.
RADIUS
The value of "Session-Timeout" is given