Panasonic PN28080i, Руководство по эксплуатации

Страница: 161 / 442

161
<Configuration Example 1>
Overview: Set the MAC address table aging time.
(1) Set the time until the dynamically learned entries in the MAC
address table are automatically deleted to 1,200 seconds.
Fig. 3-6-5 Example of setting the MAC address table aging time
<Configuration Example 2>
Overview: Disable communications with devices connected to Port 1
other than statically entered ones (MAC address: 00:00:00:00:00:01).
(1) Statically enter MAC address 00:00:00:00:00:01 in Port 1 (VLAN
1).
(2) Move to the interface configuration mode for Port 1.
(3) Disable the MAC address auto-learning of Port 1.
Fig. 3-6-6 Example of static MAC address entry
<Configuration Example 3>
Overview: Set the limit of the number of auto-learned MAC addresses
for Port 1 to 1.
(1) Set the limit of the number of auto-learned MAC addresses for
Port 1 to 1.
Fig. 3-6-7 Example of setting the limit of the number of auto-learned MAC
M24eGi> enable
M24eGi# configure
M24eGi(config)# mac-address-table static 00:00:00:00:00:01 gi0/1 vlan 1
M24eGi(config)# interface GigabitEthernet0/1
M24eGi(config-if)# no mac-learning
M24eGi(config-if)# exit
M24eGi(config)# exit
M24eGi#
(1)
(3)
(2)
M24eGi> enable
M24eGi# configure
M24eGi(config)# mac-address-table aging-time 1200
M24eGi(config)# exit
M24eGi#
(1)
M24eGi> enable
M24eGi# configure
M24eGi(config)# interface GigabitEthernet0/1
M24eGi(config-if)# mac-learning limit 1
M24eGi(config-if)# exit
M24eGi(config)# exit
M24eGi#
(1)