- 8 -
６．Part names and functions
(1) RANGE： measure range（１、２、３、４、５、６、７、８、９）set
(2) L1 ON : setＯＮ point of limit 1 （set range：０〜１００％）
(3) L1 OFF: setＯＦＦ point of limit 1（set range：０〜１００％）
(4) L2 ON : setＯＮ point of limit 2 （set range：０〜１００％）
(5) L2 OFF: setＯＦＦ point of limit 2（set range：０〜１００％）
Minimum range of Hysteresis is still１％.
(6) INTEGRATION TIME： Integral time set（set range：０〜３０ seconds）
【for indication】
POWER LED : Light on as power on
FAULT LED : CPU on when abnormal
L1 ON LED : Light on over limit１set
L2 ON LED : Light on over limit１set
4 beams indicate LED: detection density
will indicate per 0-100% complying with
setup.
【for button】
→
：
use when changing beam of
number/value.
↑
： use when increasing number/value.
ＭＯＤ
： use when switching parameter set
mode and measure mode.
Pushing after set change will
memorize parameter and return to measure
mode.
ＳＥＬＥＣＴ
：
Use when switching set items.
Ｆ−ＲＥＳＥＴ
：
U se when setting measure again.
％
Matsushima Measure Tech Co., Ltd.
MADE IN JAPAN
Fig.11. Front panel of Output unit
