Panasonic PAW-TD20C1E5-UK, Руководство по установке

Страница: 11 / 16

11
Technical data
Technical Data Sheet - Indirect storage tank - ErP data
Directive: 2010/30/EU Regulation: EU 812/2013 Directive: 2009/125/EU Regulation: EU 814/2013
Water heater Efficiency according to standard: prEN50440 : 2015
M.T. ITEM No. MODEL/IDENTIFIER Rating ErP Heat loss - W Storage vol.
80341850 PAW-TD 20 C1E5-UK - 1,5kW / 1x230V A 43 192
80341950 PAW-TD 30 C1E5-UK - 1,5kW / 1x230V A 49 284
80341951 PAW-TD 30 C1E5HI-UK - 1,5kW / 1x230V A 49 280
These products are manufactured by OSO Hotwater AS, Industriveien 1, 3300 Hokksund, Norway.
Description Unit
PAW-
TD20C1E5-UK
PAW-
TD30C1E5-UK
PAW-
TD30C1E5HI-UK
Actual capacity of the water tank at 20°C L. 192 284 280
Outer diameter of the tank mm 595 595 595
Height of the appliance mm 1270 1750 1750
Gross weight of the appliance kg 50 61 65
Net weight of appliance once filled with sanitary water kg 241 341 345
Material of element - incoloy 825 incoloy 825 incoloy 825
Thermal insulation material - PUR+VIP PUR+VIP PUR+VIP
Thermal insulation of the tank, average thickness mm 50 50 50
IP classification - 21 21 21
Standby heat losses / 24 hour kWh/24h 1.03 1.18 1.18
Standby heat losses Watts 43 49 49
V40 Hotwater volume L. 315 465 389
Primary flowrate for Reheat time & Primary heating power l/h 900 900 900
Heating coil HEX surface m² 1.8 1.8 2.35
Heating up time heating coil min 18.5 26.08 18.5
Primary Heating power heating coil kW 35 32 39.4
Primary Heating coil pressure drop mbar 120 120 170
Heat up time immersion heater min 255 464 384
ErP class - A A A
Pressure information
Design pressure of cylinder (rated pressure) MPa/Bar 1 / 10 1 / 10 1 / 10
Design pressure of heating coil MPa/Bar 1 / 10 1 / 10 1 / 10
Operating pressure of cylinder MPa/Bar 0.3 / 3 0.3 / 3 0.3 / 3
Operating pressure of heating coil MPa/Bar 0.25 / 2.5 0.25 / 2.5 0.25 / 2.5
Max. operating temperature of cylinder °C 70 70 70
Max. operating temperature of heating coil °C 99 99 99
Hydraulic connections
Secondary return Inch 3/4” 3/4” 3/4”
Primary Heating coil Flow Inch 3/4” 3/4” 3/4”
Primary Heating coil Return Inch 3/4” 3/4” 3/4”
Cold water Inch 3/4” 3/4” 3/4”
Hot water Inch 3/4” 3/4” 3/4”
Immersion heater Inch 5/4” 5/4” 5/4”
T&P valve (factory fitted) Inch 1/2” 1/2” 1/2”
Temperature sensor sleeve diameter mm 8 8 8
Electrical characteristics
Supply voltage and frequency WHz 220-240 VAC 220-240 VAC 220-240 VAC
Power of the electrical resistance kW 1.5kW@230V 1.5kW@230V 1.5kW@230V
Electrical installation - IEEE regs IEEE regs IEEE regs
Thermostat type - immersion/cylinder - Probe/Probe Probe/Probe Probe/Probe
Immersian Heater - Phase Phase single single single
Immersion thermostat - temp range °C 8-70 8-70 8-70
Immersion thermostat - set temp °C 60 60 60
Safety
Safety valve opening pr/- 5% MPa/Bar 0.8 / 8 0.8 / 8 0.8 / 8
T&P valve opening pressure/Temp. MPa(Bar) /°C 1/90 (10/90) 1/90 (10/90) 1/90 (10/90)
Safety thermostat cutout - immersion °C 87 87 87
Safety thermostat cutout - cylinder °C 80 80 80