4
Precautions
Power and Ground Connection Cautions
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a significant amount of current that can generate heat and eventually
cause fire if left unattended over an extended period of time.
Always use the power cord provided with your machine. When an extension power cord is
required, always use a properly rated cord.
120 V/15 A or AC 220 - 240V/10 A
If you use a cord with an unspecified current rating, the machine or plug may emit smoke or
become hot to the touch.
Do not attempt to repair, pull, bend, chafe or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire or electric shocks.
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is damaged or insulated wires are exposed, contact the authorized
Panasonic dealer for a replacement. Using a damaged cord can cause fire or electric
Stop operation immediately if your machine emits smoke, excessive heat, unusual noise, or
abnormal smell, or if water is spilt onto the machine. These conditions can cause fire.
Immediately switch Off and unplug the machine, and contact the authorized Panasonic
.
Do not disconnect or reconnect the machine while the power switch is in the On position.
Disconnecting a live connector can cause arcing, consequently deforming the plug and
cause fire.
When disconnecting the machine, grasp the plug instead of the cord. Pulling on a cord
forcibly can damage it and cause fire or electric shock.
When the machine is not used over an extended period of time, switch it Off and unplug it.
If an unused machine is left connected to a power source for a long period, degraded insulation
can cause electric shocks, current leakage or fire.
Be sure to switch Off and unplug the machine before accessing the interior of the machine
for cleaning, maintenance or fault clearance. Access to a live machine's interior can cause
electric shock.
For Your Safety
To prevent severe injury and loss of life, read this section carefully before servicing the Panasonic
machine to ensure proper and safe operation of your machine.
This section explains the Warnings and Cautions used in the machine and/or this manual.
WARNING:
Denotes a potential hazard that could result in serious injury or death.
CAUTION:
Denotes hazards that could result in minor injury or damage to the machine.
This section also explains the Warnings and Cautions used in the machine and/or this manual.
These symbols are used to alert operators to a specific operating procedure
that must not be performed.
These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.
WARNING
Please ensure that the machine is installed near a wall outlet and is easily accessible.
shocks.
dealer.
Содержание Panafax UF-9000
