10
Supplying Power
Note:
• While the DC Power Cable (supplied) is
connected to the AC Adaptor, the Battery
cannot be charged.
• When not in use, unplug AC Adaptor from
AC outlet. (Adaptor uses 1.2 W of electricity
while plugged in.)
1
Connect AC Adaptor DC OUT to
Camcorder DC IN
with supplied DC
Power Cable.
2
Plug in AC Adaptor.
POWER Lamp lights.
Battery Care
DC OUT Connector
• Do not place the Battery near or dispose of in fire.
• Do not connect (short-circuit) the positive (+) and
negative (–) terminals.
• Never attempt to disassemble or reassemble the Battery.
• Do not drop or jar Battery.
• Use Battery with specified units only.
• Charge only with specified charger.
• Do not use an insufficiently charged or worn-out Battery.
• Battery can be charged within a temperature range of
10
°
C (50
°
F) and 35
°
C (95
°
F).
• Battery is normally warm after charging or just after use.
Battery Life and Protection
• If Battery is used in extremely high
temperatures, a safety device will
automatically prevent operation.
• While not in use, remove Battery from
the Camcorder and AC Adaptor, and
store in a cool, dark, dry place.
• Keep Battery terminals clean.
CAUTION
DC IN
Connector
DC Power Cable
POWER Lamp
This unit will operate on 110/120/220/240 V AC 50/60 Hz. An AC plug adaptor may
be required for voltages other than 120 V AC. Please contact either a local or
foreign electrical parts distributor for assistance in selecting an alternate AC plug.
We recommend using the accessory power plug adaptor (VJSS0070/
K2DB42E00001) in an area which has special AC outlets.
CAUTION
AC Adaptor
02.L354K Getting p9-16
04.1.6, 0:22 PM
10
