16
Pour des enregistrements sous un
éclairage faible.
Lampe intégrée
Préparatifs
• Raccorder le caméscope à une source
d’alimentation.
• Mettre l’interrupteur à la position “CAMERA”.
Remarques :
• L’utilisation de la lampe réduit l’autonomie du bloc-
batterie.
• Si la lampe doit être utilisée pendant une période
prolongée dans un environnement chaud, assurer
une bonne ventilation de l’appareil.
• S’assurer que le sélecteur LIGHT est à la position
“OFF” lorsque la lampe n’est pas utilisée.
Utilisation de la lampe
A
: Lampe activée
A
: Lampe en mode
automatique
1
Appuyer sur MENU
pour afficher le menu
des réglages.
Appuyer
sur UP
ou DOWN
pour
sélectionner
LIGHT MODE
.
2
Appuyer sur M.FOCUS
pour sélectionner
OFF/ON ou OFF/ON/AUTO.
Appuyer sur
MENU
pour quitter.
3
Appuyer sur LIGHT
à plusieurs reprises
pour activer, désactiver ou régler
automatiquement la lampe.
• Lors du réglage automatique, la lampe
s’allume et s’éteint selon les conditions de
l’éclairage.
Viseur ou écran DCL
1
,
2
3
Ce symbole indique que la lampe
devient chaude. S’assurer que la
lampe ne soit pas couverte par quoi
que ce soit durant l’utilisation.
Attention
02.L354-K Getting p09-16(F)
04.1.6, 0:27 PM
16