Panasonic NV-VP60 Series Скачать руководство пользователя страница 38

Страница: 38 / 44

RQTV0115

Recording from DVD to VHS

You can record the contents of a disc onto a video cassette.

≥

Select the unit viewing channel (or the AV input) on the TV.

≥

Insert a video cassette with an intact erasure prevention tab.

≥

Press

[DVD SELECT]

(

8).

≥

Select the desired recording mode (

16).

Only discs that are not copy protected can be used.

≥

Press

[DVD SELECT]

(

8).

≥

Set “On-Screen Messages” to “Off” (Setup menu

37).

≥

Insert the disc to be recorded (

23). When you copy NTSC discs,

select “NTSC” in “NTSC Disc Output” (Setup menu

37).

.........................................................................................................................................................................................................................

[1] Press [VHS SELECT] and then

press [INPUT SEL] repeatedly.

Select “dc” channel.

≥

Recording is allowed only when the
VHS input channel is set to “dc” (

below).

[2] Press [DVD SELECT] and then press [

PLAY].

Start playing the disc and find the playing start point.

[3] Press [

;

PAUSE].

[4] Press [VHS SELECT] and then press [

PLAY].

Start playing the video cassette and find the recording start
point.

[5] Press [

;

PAUSE] and then press [

REC].

Put the unit in the recording standby mode.

[6] Press

[

;

PAUSE].

VHS recording and disc play start at the same time.

To stop recording

1) Press

[

∫

STOP]. Recording will stop.

2) Press [DVD SELECT] and then press [

∫

STOP].

Disc play will stop.

Notes:

≥

You can select the audio channel to be recorded on the Normal
audio track when copying a bilingual DVD (

21).

≥

Recording cannot be done if using a copy protected disc. By
pressing

[

REC]

at “dc” channel during DVD playback, the

message “COPYING OF THIS MATERIAL IS NOT ALLOWED.”
appears on the TV screen.

You can copy programmes on a DVD-RAM disc to a video cassette
with One-touch operation.

≥

This function allows DVD-RAM discs recorded by Panasonic DVD
recorders to be copied.

≥

Insert the disc containing the programme to be copied (

23).

≥

This function allows you to record the whole content on a disc
automatically. Confirm that the remaining tape time is sufficient for
recording.

While stopped, press and hold [DVD-RAM
COPYING] for 5 seconds or more.

When the disc is played all of the content or the tape reaches its end,
this unit automatically stops copying.

≥

The message is displayed on TV screen for a few seconds when
DVD-RAM copying is completed.

To stop recording

Press

[

∫

STOP]

When “

” and “

” is flashing

Check the settings again.

Notes:

≥

In this function, the index signal is automatically added on the tape
for each of the programmes. You can find the desired programme
with these index signals (

19).

≥

This function does not work during timer recording standby mode.

≥

When the copying starts, “On-Screen Messages” in the Setup
menu is automatically set to “Off”. The “dc” channel is automatically
selected (

below).

≥

If you press

[DVD-RAM COPYING]

again, the copying starts at the

stop position memorized (

Resume function