61
Remarks etc.
Advanced Operations
3
Turn the [
34
] Dial to
select [COUNTER
RESET].
4
Press the [SET] Button to
select [YES].
≥
When recording or playback
starts, the elapsed tape time is
indicated in hours, minutes and
seconds. During playback of
parts of the tape on which no
recording has been made, this
indication does not change.
≥
If you rewind the tape further
than the tape counter position
[0:00.00], the minus sign [–]
appears in front of the Tape
Counter Indication.
2
: Camera Mode
3
: VCR Mode
∫
Changing the Tape Counter Indication
By changing the setting for [DISPLAY] on the
[DISPLAY SETUP] Sub-Menu of the [VCR
FUNCTIONS] or the [CAMERA FUNCTIONS] Main-
Menu, the Counter Display Mode can be changed in
the order shown in the above illustrations
1
–
4
.
Camera Mode
A
1
ALL:
Elapsed Tape Time Indication (initial
setting)
2
MEMORY:
Memory Stop Indication and Elapsed
Tape Time Indication
3
PARTIAL:
No Counter Indication
Only a few indications are displayed so
that all parts of the picture can be seen
clearly. However, when you turn on the
Movie Camera, all indications initially
appear for a few seconds to inform you
of the selected settings.
≥
In this condition, if you switch the Movie Camera
over to the VCR Mode and then back to the
Camera Mode, [ALL] is automatically selected for
the Tape Counter Indication.
4
OFF:
No Counter Indication
In this mode, only the Operation Mode
Indications and Warning/Alarm
Indications can appear. However, when
turning on the Movie Camera, all
indications appear for a few seconds to
inform you of the selected settings.
VCR Mode
B
1
ALL:
Elapsed Tape Time Indication (initial
setting)
2
MEMORY:
Memory Stop Indication and Elapsed
Tape Time Indication
3
OFF:
No Counter Indication
In this mode, only the Operation Mode,
Warning/Alarm, Insert Editing Mode
and Audio Dubbing Mode Indications
can appear.
1
2
4
3
A
1
2
3
B
u
R 0:30
0:00.00
REC
AUTO
6
14
q
u
R 0:30
M 0:00.00
REC
AUTO
6
14
q
REC
AUTO
REC
A
B
14
q
SP
SP
u
R 0:30
SP
0:00.00
◊
u
R 0:30
SP
M 0:00.00
◊
◊
TBC
TBC
MF/
TRACKING
5
Press the [
5
] or [
6
]
Button.
The tape automatically
stops approximately at the
position at which you reset
the counter to zero.
4
After playback or
recording is finished:
Set the [CAMERA/
OFF/VCR] Switch to
[VCR].
CAMERA
OFF
VCR
s
SEARCH
SEARCH
r
6
5
S