Before Use
-10-
ª
Free Style Remote Controller with Mic
This controller allows the scene to be shot in
various angles, high to low and is also convenient
when the Tripod is used. When you do not use
this controller, attach the clip to the Grip Belt for
convenience.
This controller allows the Movie Camera to be
used more conveniently by a left-handed user.
(85)
Microphone [MIC]
-21-
(86)
Recording Start/Stop Button [REC]
(87)
Zoom Lever [W/T]
≥
Zoom speed changes in 2 stages.
(88)
Photoshot Button [PHOTO SHOT]
(89)
Microphone Switch Button [TALK]
-21-
≥
When connecting the Free Style Remote
Controller with Mic to [REMOTE] Socket
and the [TALK] Button is pressed, the
narration microphone activates and the
built-in microphone on the Movie Camera
does not operate.
(90)
Clip
≥
Insert the plug securely into the [REMOTE]
Socket as far as it will goes. A loose
connection will spoil normal operation.
The Remote Controller
ª
Inserting a Button-type Battery
Before using the Remote Controller, insert the
supplied button-type battery.
1
While pressing the Stopper
1
, pull out the
Battery Holder.
2
Insert the button-type battery with the (
i
)
marking facing upward.
(85)
(86)
(87)
(88)
(89)
(90)
1
3
Insert the Battery Holder into the Remote
Controller.
≥
When the button-type battery is exhausted,
replace it with a new CR2025 battery. (A battery
is normally expected to last about 1 year.
However, it depends on operation frequency.)
≥
Make sure to match the poles correctly when
inserting the battery.
ª
Using the Remote Controller
1
Direct the Remote Controller to the Remote
Control Sensor
(43)
of the Movie Camera
and press an appropriate button.
≥
Distance from the Movie Camera: Within
approximately 5 metres
≥
Angle: Within approximately 10
o
in the
upward, and 15
o
in the downward and
horizontal directions from the central axis
WARNING
“THE LITHIUM BATTERY IS A CRITICAL
COMPONENT (TYPE NUMBER CR2025
MANUFACTURED BY PANASONIC).
IT MUST NEVER BE SUBJECTED TO
EXCESSIVE HEAT OR DISCHARGE. IT
MUST THEREFORE ONLY BE FITTED IN
EQUIPMENT DESIGNED SPECIFICALLY
FOR ITS USE.
REPLACEMENT BATTERIES MUST BE OF
THE SAME TYPE AND MANUFACTURER.
THEY MUST BE FITTED IN THE SAME
MANNER AND LOCATION AS THE
ORIGINAL BATTERY, WITH THE
CORRECT POLARITY CONNECTIONS
OBSERVED.
DO NOT ATTEMPT TO RE-CHARGE THE
OLD BATTERY OR RE-USE IT FOR ANY
OTHER PURPOSE. IT SHOULD BE
DISPOSED OF IN WASTE PRODUCTS
DESTINED FOR BURIAL RATHER THAN
INCINERATION.”
10˚
15˚
15˚
15˚
(43)
70B-ENG.book 10 ページ ２００３年３月２７日 木曜日 午前１１時５３分
