- Eng-37 -
English
Before Requesting Service
PROBLEM
POSSIBLE CAUSE
REMEDY
Oven will not turn on.
The oven is not plugged in
securely.
Circuit breaker or fuse is tripped
or blown.
Remove plug from outlet, wait 10
seconds and re-insert.
Contact the specifi ed service
center.
Plug another appliance into the outlet
to check if the outlet is working.
The door is not closed completely.
Another program has already
been entered into the oven.
Start
button was not pressed
after programming.
The program has not been
entered correctly.
Stop / Reset
button has been
pressed accidentally.
Close the oven door securely.
Press
Start
button.
Program again according to the
Operating Instructions.
Program oven again.
Press
Stop / Reset
button to cancel
the previous program and program
again.
Oven will not start
cooking.
No steam
Check whether the water tank
has water.
Check whether the water tank is
installed correctly in place.
Fully fi ll the water tank and properly
install it.
"U14" appears in the
display window.
The water tank lacks water.
The 1
st
and 2
nd
time when "U14"
shows in the display window, you
can press
Start
button to resume
cooking. If "U14" shows a 3
rd
time,
stop cooking, re-fi ll the water tank,
position back in the oven and press
Start
button to resume cooking.
Do not pour detergent mixture
into the sink of the oven when
using "Evaporating fl ume"
function (Auto menus No. 16).
Or the mixture is less than 30 ml.
Pour 30 ml of detergent mixture into
the sink of the oven. Read P.22 for
details. Press
Stop/Reset
button
and U14 will disappear. Re-select
the "Evaporating fl ume" (Auto menus
No.16), press
Start
button and
cleaning will start.
"U90" appears in the
display window.
"U50" appears in the
display window.
Drain Water function has been
used 3 times uninterruptedly.
Wait 10 minutes before operating
again.
The cavity is overheated.
Operate again after cooling down
and "U50" disappears.
If it seems there is a problem with the oven, contact an authorized Service Center.
There is a problem with the
outlet.
F0003BM03HP_Eng_170306.indd 37
2017/3/6 8:50:53