Instructions for Use
For Hong Kong, set the option code "0".
1
If using the dishwasher in an area of high water hardness level, whitish staining may leave on the utensils and
baskets.The dishwasher can be programed according to the level of water hardness. By adding dishwasher salt,
the water will be softened to reduce its hardness to achieve a better cleaning result.
●
Make the following settings to avoid consuming more dishwasher salt and water and having a poor
cleaning result.
■
Area setting
(while power is turned off)
1
Press
Delay Start
and
Start/Pause
for
2.5 seconds simultaneously. After 2
beep sounds, start setting.
2
Press
Delay Start
, select the function
code “Air”.
3
Press
Program
and select the
corresponding option code according
to the water hardness level.
Confirm power is turned off
■
Adding dishwasher salt
(while power is off)
Remove the lower basket, unscrew the lid, and
carefully pour in the dishwasher salt (about 400
g
).
Then, tighten the cover.
• When using for the first time, fill in water (about 200
g
)
fully after adding the salt. Stir well until it dissolves.
4
Press
Start/Pause
to save the setting.
Six beep sounds complete the setting.
Water Softening System
●
When adding the salt, use a scale to weigh it and pour in with a measuring cup. If you accidentally spill the salt,
wipe off the salt on the dispenser (to prevent the salt rubbing against the lid, hence reducing the tightness).
●
When using for the first time or when the "Salt” indicator lights up, please add the dishwasher salt (do not
use edible salt), and read carefully and follow the instructions on the dishwasher salt.
●
If you use all-in-one dishwasher detergent which contains dishwasher salt, and the water hardness is less
than 300 m
g
/L, you don't need to use the dishwasher salt. However, if water hardness is over 300 m
g
/L,
you still need to add dishwasher salt.
Adding dishwasher detergent
2
Add into the dishwasher according to the
instructions on the dishwasher detergent.
The standard amount for each washing
(for reference only)
Dishwasher tablet : 1 tab (about 10
g
)
Dishwasher powder : 21
g
or
(Dishwasher
tablet)
(Dishwasher
powder)
●
Please read carefully and follow the
precautions and instructions on the
dishwasher detergent.
Adding Detergent and Washing
Air
0
Air + Intense
100 [m
g
/L] or less
1 100 - 200 [m
g
/L]
2
Air + Basic *
200 - 300 [m
g
/L]
3
Air + Intense, Basic
300 - 400 [m
g
/L]
4
Air + Speedy
400 - 500 [m
g
/L]
Display indicator
(lights up)
* The above are factory set.
Function code
(press Delay
Start)
Option code
(water hardness)
(press Program)
Air
EN9
close
open
400
g
200
g
Reminder
Reminder
Confirm power is turned off
Adding Detergent
For Hong Kong with option code "0", there is no need to add salt.
Please skip this step and move to the next step (Adding Detergent).
Press to select a program
4
• Each time you press the Program button, you can switch the mode shown in the chart below, and the
indicators in the display will light up in turn.
• When an indicator lights up, the mode of the previous operation is set by default
(except if the last operation was “Dry Only”) (Mode
①
is factory set).
Press to turn on the power
3
•
After all indicators in the display blink once, only the indicator of the last operation will light up
(and the other indicators will light off) (except if the last operation was "Dry Only").
• If all indicators in the display keep lighted up, close the door and turn the power on again.
Select functions
●
①
and
②
are suitable for washing immediately after the meal.
③
and
④
are suitable for washing several hours after
the meal or when the items are heavily soiled.
⑤
and
⑥
are suitable for washing immediately after the meal, when
there are less items to wash or when water-saving and energy-saving are in mind.
⑦
and
⑧
are for cleaning and
maintenance of the inside of the dishwasher.
⑨
is applicable for drying after hand wash, or using as a dish warmer.
⑩
and
⑪
are best when the items are slightly or lightly soiled.
●
Basic, Intense, Care, Eco, Speedy programs (i.e. except Dry) can supplement or cancel the Keep setting.
When Keep is set, air will be intermittently blowing for about 2 hours.
●
The Sanitize mode can be combined with other programs (except Dry). The maximum water temperature
during rinsing can be changed to 80 °C, hence achieving better cleaning result.
●
The operating times in the above chart are measured at room temperature 20 °C, supply water temperature 15 °C,
and water pressure 0.24 MPa. The actual operating time depends on room temperature, water temperature,
water pressure, and the location of the items loaded and so on.
●
During the operation, the indicator of the relevant mode will keep light on and off, indicating that operation is in progress.
EN10
4
Display
3
5
6
Main
program
Additional
mode
Main
drying
function
Additional
drying
mode
Operation process and operation time (approx.)
Wash (31 minutes) → Rinse 3 times (35 minutes, 70 °C)
→ Dry (30 minutes) → Keep (2 hours)
Basic
-
0.5 h
Keep
Sanitize
Wash (31 minutes) → Rinse 3 times (43-53 minutes,
maximum temperature up to 80 °C) → Dry (30 minutes)
→ Keep (2 hours)
Basic
0.5 h
Keep
Intense
-
0.5 h
Keep
Wash (60 minutes) → Rinse 3 times (40 minutes, 70 °C)
→ Dry (30 minutes) → Keep (2 hours)
Sanitize
Intense
0.5 h
Keep
Wash (60 minutes) → Rinse 3 times (48 - 58 minutes,
maximum temperature up to 80 °C) → Dry (30 minutes)
→ Keep (2 hours)
Care
-
-
-
Wash (108 minutes) → Rinse 3 times (26 minutes, 60 °C)
Care
Sanitize
-
-
Wash (108 minutes) → Rinse 3 times (34 - 44 minutes,
maximum temperature up to 80 °C)
Dry Only
-
-
1 h
Dry (60 minutes)
Speedy
-
-
-
Wash (17 minutes) → Rinse 2 times (18 minutes, 60 °C)
Speedy Sanitize
-
-
Wash (17 minutes) → Rinse 2 times (26 - 36 minutes,
maximum temperature up to 80 °C)
Eco
Air
-
-
Wash (31 minutes) → Rinse 3 times (73 minutes, 60 °C)
→ Air (240 minutes)
Sanitize
Eco
Air
-
Wash (31 minutes) → Rinse 3 times (81 - 91 minutes,
maximum temperature up to 80 °C) → Air (240 minutes)
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Serial
No.
Reminder
NP-TH1HK.indd 12
2018/11/29 15:01:46
Job Name
B685891_NP-TH1取説(香港)
Color
K
File Name
0012_NP-TH1HK.pdf
Refine Time
2018-11-29 15:12:46
Print Time
2018-12-10 15:24:57
Job Name
B685891_NP-TH1取説(香港)
Color
K
File Name
0012_NP-TH1HK.pdf
Refine Time
2018-11-29 15:12:46
Print Time
2018-12-10 15:24:57
English
Instructions for Use
For Hong Kong, set the option code "0".
1
If using the dishwasher in an area of high water hardness level, whitish staining may leave on the utensils and
baskets.The dishwasher can be programed according to the level of water hardness. By adding dishwasher salt,
the water will be softened to reduce its hardness to achieve a better cleaning result.
●
Make the following settings to avoid consuming more dishwasher salt and water and having a poor
cleaning result.
■
Area setting
(while power is turned off)
1
Press
Delay Start
and
Start/Pause
for
2.5 seconds simultaneously. After 2
beep sounds, start setting.
2
Press
Delay Start
, select the function
code “Air”.
3
Press
Program
and select the
corresponding option code according
to the water hardness level.
Confirm power is turned off
■
Adding dishwasher salt
(while power is off)
Remove the lower basket, unscrew the lid, and
carefully pour in the dishwasher salt (about 400
g
).
Then, tighten the cover.
• When using for the first time, fill in water (about 200
g
)
fully after adding the salt. Stir well until it dissolves.
4
Press
Start/Pause
to save the setting.
Six beep sounds complete the setting.
Water Softening System
●
When adding the salt, use a scale to weigh it and pour in with a measuring cup. If you accidentally spill the salt,
wipe off the salt on the dispenser (to prevent the salt rubbing against the lid, hence reducing the tightness).
●
When using for the first time or when the "Salt” indicator lights up, please add the dishwasher salt (do not
use edible salt), and read carefully and follow the instructions on the dishwasher salt.
●
If you use all-in-one dishwasher detergent which contains dishwasher salt, and the water hardness is less
than 300 m
g
/L, you don't need to use the dishwasher salt. However, if water hardness is over 300 m
g
/L,
you still need to add dishwasher salt.
Adding dishwasher detergent
2
Add into the dishwasher according to the
instructions on the dishwasher detergent.
The standard amount for each washing
(for reference only)
Dishwasher tablet : 1 tab (about 10
g
)
Dishwasher powder : 21
g
or
(Dishwasher
tablet)
(Dishwasher
powder)
●
Please read carefully and follow the
precautions and instructions on the
dishwasher detergent.
Adding Detergent and Washing
Air
0
Air + Intense
100 [m
g
/L] or less
1 100 - 200 [m
g
/L]
2
Air + Basic *
200 - 300 [m
g
/L]
3
Air + Intense, Basic
300 - 400 [m
g
/L]
4
Air + Speedy
400 - 500 [m
g
/L]
Display indicator
(lights up)
* The above are factory set.
Function code
(press Delay
Start)
Option code
(water hardness)
(press Program)
Air
EN9
close
open
400
g
200
g
Reminder
Reminder
Confirm power is turned off
Adding Detergent
For Hong Kong with option code "0", there is no need to add salt.
Please skip this step and move to the next step (Adding Detergent).
Press to select a program
4
• Each time you press the Program button, you can switch the mode shown in the chart below, and the
indicators in the display will light up in turn.
• When an indicator lights up, the mode of the previous operation is set by default
(except if the last operation was “Dry Only”) (Mode
①
is factory set).
Press to turn on the power
3
•
After all indicators in the display blink once, only the indicator of the last operation will light up
(and the other indicators will light off) (except if the last operation was "Dry Only").
• If all indicators in the display keep lighted up, close the door and turn the power on again.
Select functions
●
①
and
②
are suitable for washing immediately after the meal.
③
and
④
are suitable for washing several hours after
the meal or when the items are heavily soiled.
⑤
and
⑥
are suitable for washing immediately after the meal, when
there are less items to wash or when water-saving and energy-saving are in mind.
⑦
and
⑧
are for cleaning and
maintenance of the inside of the dishwasher.
⑨
is applicable for drying after hand wash, or using as a dish warmer.
⑩
and
⑪
are best when the items are slightly or lightly soiled.
●
Basic, Intense, Care, Eco, Speedy programs (i.e. except Dry) can supplement or cancel the Keep setting.
When Keep is set, air will be intermittently blowing for about 2 hours.
●
The Sanitize mode can be combined with other programs (except Dry). The maximum water temperature
during rinsing can be changed to 80 °C, hence achieving better cleaning result.
●
The operating times in the above chart are measured at room temperature 20 °C, supply water temperature 15 °C,
and water pressure 0.24 MPa. The actual operating time depends on room temperature, water temperature,
water pressure, and the location of the items loaded and so on.
●
During the operation, the indicator of the relevant mode will keep light on and off, indicating that operation is in progress.
EN10
4
Display
3
5
6
Main
program
Additional
mode
Main
drying
function
Additional
drying
mode
Operation process and operation time (approx.)
Wash (31 minutes) → Rinse 3 times (35 minutes, 70 °C)
→ Dry (30 minutes) → Keep (2 hours)
Basic
-
0.5 h
Keep
Sanitize
Wash (31 minutes) → Rinse 3 times (43-53 minutes,
maximum temperature up to 80 °C) → Dry (30 minutes)
→ Keep (2 hours)
Basic
0.5 h
Keep
Intense
-
0.5 h
Keep
Wash (60 minutes) → Rinse 3 times (40 minutes, 70 °C)
→ Dry (30 minutes) → Keep (2 hours)
Sanitize
Intense
0.5 h
Keep
Wash (60 minutes) → Rinse 3 times (48 - 58 minutes,
maximum temperature up to 80 °C) → Dry (30 minutes)
→ Keep (2 hours)
Care
-
-
-
Wash (108 minutes) → Rinse 3 times (26 minutes, 60 °C)
Care
Sanitize
-
-
Wash (108 minutes) → Rinse 3 times (34 - 44 minutes,
maximum temperature up to 80 °C)
Dry Only
-
-
1 h
Dry (60 minutes)
Speedy
-
-
-
Wash (17 minutes) → Rinse 2 times (18 minutes, 60 °C)
Speedy Sanitize
-
-
Wash (17 minutes) → Rinse 2 times (26 - 36 minutes,
maximum temperature up to 80 °C)
Eco
Air
-
-
Wash (31 minutes) → Rinse 3 times (73 minutes, 60 °C)
→ Air (240 minutes)
Sanitize
Eco
Air
-
Wash (31 minutes) → Rinse 3 times (81 - 91 minutes,
maximum temperature up to 80 °C) → Air (240 minutes)
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Serial
No.
Reminder
NP-TH1HK.indd 13
2018/11/29 15:01:57
Job Name
B685891_NP-TH1取説(香港)
Color
K
File Name
0013_NP-TH1HK.pdf
Refine Time
2018-11-29 15:12:53
Print Time
2018-12-10 15:24:57
