Panasonic NP-6F2MUQNZ-NZ, Руководство по обслуживанию

Страница: 43 / 53

43
6.3. Procedure
Procedure of Test Program (for models controlling water filling by flowmeter)
No. Display on the screen Process Description
0 8:88 Initialization Power on, standby mode.
1 05 or Turbidity value Inlet Valve
Open inlet valve and fill with 3.6L water. The diverter would move to position rotating
both upper and lower sprayarms. If the model is equipped with turbidity sensor,
turbidity value would be adjusted and shown on the screen.
2 04/Temperature value
Higher-speed
Washing Pump
and Heating Element
Run higher-speed washing pump and 10s later run heating element until water
temperature reaches 57°C. Then the machine will pause.
Press Start/Pause button to jump into the next step.
3 03
Lower-speed
Washing Pump
and Dispenser
2s later run lower-speed washing pump for 8s. dispenser will act for 45s in this step.
4 02 Regeneration Valve Open regeneration valve for 30s.
5 01 Drain Pump Drain for 30s.
6 F* finish Buzz one sound, stop, and stand by.