- Eng-35 -
English
Considering IR sensor assembled deep inside cavity side wall, if it fails to detect the
surface temperature of the foods, in that way the detected temperature will be different
from the actual temperature. Therefore, we do not recommend using straight-sided
containers with narrow necks when reheating small amount of food or liquids, in that the
side wall of the container will obstruct the infrared rays to get through and lead to error
detection. In order to achieve best performance, the following steps should be taken:
1.
When reheating solid foods, please use open, flat container with food is no less than 100
g
.
2. When reheating liquids, avoid using straight-sided containers with narrow necks and liquids more than 200 ml.
3.
Place the container at the center of flat table.
IR sensor detects the food temperature directly
IR sensor may fails to detect the food temperature because the side
wall of the container obstruct the infrared ray given out by the food.
4. The default setting is 70 °C when plugging in. From the second time on, the default setting will be
changed to previously setting if between 55~75 °C.
5. After reheating, stir then serve.
6. For the beverage, the reheating ranges from 1-4 cups (200 ml/cup). Default temperature is 8-10 °C.
Please use open and shallow container, 80% full. Stir after reheating. The illustration shows the
placement of milk cups. (Container should not place at the edge to prevent boiling.)
1 cup
3 cups
2 cups
Oven door
4 cups
7.
Cover food securely with plastic film, otherwise, the temperature of food may not be tested. If the
plastic wrap is overlapped, make sure the overlapped area is placed downwards.
Plastic film
Food
8. If the cavity temperature is too high, display window will appear "
". Sensor Reheat feature can
be used again until the "
" disappear.
9.
The actual temperature maybe different from the required temperature. It depends on the cavity
temperature, the food density, container and the placement of the food etc.
10. Food less than 100
g
cannot be detected. It may cause overcook.
11. Do not use straight-sided container with narrow necks when using Sensor Reheat.
Sensor Reheat Setting
(continued)
