– 20 –
Installation Instructions for Stacking
Joint Plate
Joint
Plate
Projection
Projection
Fig. 1
Fig. 2
Important
1. Disconnect the power cord from the wall socket
before attempting installation.
2. For stacking installation, you must use the
Panasonic Joint Plate A1134-3280 (Available
via service route).
3. Combination of the unit for stacking is limited
within only the following model.
NE-1853
4. Do not stack more than one oven above bottom
oven.
Preparation
Be sure the oven cavity is empty.
Installation
1. Stack the units and remove five screws
a
as
shown in Fig. 1.
2. Loosen the screw
b
.
3. The projection on the Joint Plate must face
away from the oven. Place the Joint Plate on
the screw
b
.
4. Attach and tighten five screws
a
and the screw
b
. See Fig. 2.
5. Ensure the top oven is at a safe and workable
height.
