manualshive.com logo in svg

Panasonic MN101L Series, Руководство пользователя

Получите бесплатное руководство пользователя для продуктов серии Panasonic MN101L на manualshive.com. Скачайте подробное описание товара для удобного использования. Воспользуйтесь инструкциями по эксплуатации и настройке устройства, чтобы максимально раскрыть его потенциал.

Поделиться
Скачать
background image

  3

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1) 

If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and 

regulations of the exporting country, especially, those with regard to security export control, must be observed. 

(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples 

of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any 
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any 
other company which may arise as a result of the use of technical information described in this book.

(3) The products described in this book are intended to be used for general applications (such as office equipment, communications 

equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:

 Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, 

life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of 
the products may directly jeopardize life or harm the human body.

     It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with 

your using the products described in this book for any special application, unless our company agrees to your using the products in 
this book for any special application.

(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product 
Standards in advance to make sure that the latest specifications satisfy your requirements. 

(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions 

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute 
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any 
defect which may arise later in your equipment.

     Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure 

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire 
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, 

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which 
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.

20100202

     If you have any inquiries or questions about this book or our semiconductor products, please contact our 

sales division.

Special Attention and Precautions

PanaXSeries is a registered trademark of Panasonic Corporation.
The other corporation names, logotype and product names written in this book are trademarks or registered trademarks of their 
corresponding corporations.

Содержание MN101L Series




















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MN101L Series

D-Link ShareCenter Quattro DNS-345 Quick Install Manual preview
ShareCenter Quattro DNS-345
Бренд: D-Link Страницы: 40
D-Link ShareCenter Quattro DNS-345 Datasheet preview
ShareCenter Quattro DNS-345
Бренд: D-Link Страницы: 4
D-Link MYDLINK DNR-322L Datasheet preview
MYDLINK DNR-322L
Бренд: D-Link Страницы: 4
D-Link mydlink DNR-312L Quick Install Manual preview
mydlink DNR-312L
Бренд: D-Link Страницы: 8
D-Link DNS-722-4 Quick Install Manual preview
DNS-722-4
Бренд: D-Link Страницы: 16
D-Link DNS-722-4 User Manual preview
DNS-722-4
Бренд: D-Link Страницы: 88
Stanwax Laser ILDA Gem Laser projector tool Instructions preview
ILDA Gem Laser projector tool
Бренд: Stanwax Laser Страницы: 3
IAR SYSTEMS IAR KickStart Kit TWR-K60N512-IAR Getting Started Manual preview
IAR KickStart Kit TWR-K60N512-IAR
Бренд: IAR SYSTEMS Страницы: 8
ICP DAS USA USB-87P1 User Manual preview
USB-87P1
Бренд: ICP DAS USA Страницы: 62
Paradyne Hotwire 8775 MSDSL Installation Instructions Manual preview
Hotwire 8775 MSDSL
Бренд: Paradyne Страницы: 10
Moxa Technologies PT-7324 Series User Manual preview
PT-7324 Series
Бренд: Moxa Technologies Страницы: 36
Aewin Technologies SCB-9651 User Manual preview
SCB-9651
Бренд: Aewin Technologies Страницы: 86
Ubiquiti PowerBeam PBE-5AC-400-ISO Quick Start Manual preview
PowerBeam PBE-5AC-400-ISO
Бренд: Ubiquiti Страницы: 23
ebm-papst W3G710-NK67-01 Operating Instructions Manual preview
W3G710-NK67-01
Бренд: ebm-papst Страницы: 13
Atmel STK501 Specification Sheet preview
STK501
Бренд: Atmel Страницы: 2
mikroElektronika Pressure click Quick Start Manual preview
Pressure click
Бренд: mikroElektronika Страницы: 2
National Semiconductor Data Capture Board CLC-CAPT-PCASM User Manual preview
Data Capture Board CLC-CAPT-PCASM
Бренд: National Semiconductor Страницы: 15
ATEN Altusen SN0100 Series User Manual preview
Altusen SN0100 Series
Бренд: ATEN Страницы: 178

Бренды по названию

Популярные бренды

Загрузить еще бренды