Panasonic MJ-H100, Руководство по эксплуатации

Страница: 8 / 28

AFTER USE
8
Before detaching parts, make sure the motor has stopped completely, then disconnect the Plug
from the outlet. (DISASSEMBLY: refer to page 5)
1. Wash both sides of the spinner filter mesh with a sponge under
running water. Use brush if necessary.
2. Wash each part in cold or lukewarm water with a soft sponge.
Rinse and dry thoroughly before storing.
All parts must be cleaned immediately after use. Left-over food particles may cause unpleasant odours,
stains or malfunction of the appliance.
Note:
•
Do not use benzene, thinner, alcohol, bleach, polishing powder or metal brush; otherwise the
surface will be damaged.
•
Do not put in the dishwasher.
•
Some discolouration of the Spinner, the Container Cover, or the interior of the Container Unit may
occur upon usage.
•
Handle the Spinner and the Spout carefully during cleaning. This may cause injury.
* Brush and long handled sponges are not provided.
CLEANING
JUICER
1
2
Plug and Cord
1) Turn over the Motor Housing
and wind the Cord three turns
as illustrated.
Container
It is recommended to place the Container Unit
upside down to prevent damage on the Spout.
2) Insert the Cord into the
cord clamp to fix the Cord
in position.
3) When in use or after use, make
sure to position the Cord as
shown to prevent damage of
the Cord.
MOTOR HOUSING
Wipe Motor Housing with a damp cloth.
STORING