Warning display
– 9 –
Thumbnail operation and messages in USB host mode
Error codes other than the below listed are the same as when using a P2 card. Refer to the operating instructions of the product.
Thumbnail
Message
Detail
Solution
COPY IMPOSSIBLE. TOO LARGE
CLIP CONTAINED! (CLIP NAME:
XXXXXX)
A file larger than 4 GB cannot be copied to a memory card
with 32 GB or smaller capacity.
Copy the file to the product or to a microP2 card with
64 GB or larger capacity that has been formatted with the
latest P2 Viewer Plus.
NO FILE!
The specified file does not exist.
Check the file.
Software keyboard
r
AJ‑HPX3100G/AJ‑HPX2000P/AJ‑HPX2100E/AG‑HPX600P/AG‑HPX600EJ/AG‑HPX600EN/AG‑HPX370P/AG‑HPX371E/AG‑HPX372EN/
AG‑HPX374ER/AG‑HPX250P/AG‑HPX250EJ/AG‑HPX250EN/AG‑HPX255P/AG‑HPX255EJ/AG‑HPX255EN/AG‑HPG20P/AG‑HPG20E
Message
Detail
Solution
CANNOT SET!
NO INPUT!
No character is entered with the software keyboard.
Enter the password.
CANNOT SET!
RETRY PASSWORD IS DIFFERENT!
The retry password does not match.
Enter the correct password and retry password.
AUTHENTICATION ERROR!
Manual authentication has failed.
Enter the correct password.
r
AG‑HPD24P/AG‑HPD24E/AJ‑HPM200P/AJ‑HPM200E/AJ‑HPD2500P/AJ‑HPD2500E
Message
Detail
Solution
RETRY PASSWORD IS DIFFERENT!
The retry password does not match.
Enter the correct password and retry password.
AUTHENTICATION ERROR!
Manual authentication has failed.
Enter the correct password.
P2 card access LED and microP2 card status
The LED and card statuses except for the below are the same as when using a P2 card. Refer to the operating instructions of the product.
r
AJ‑HPX3100G/AJ‑HPX2000P/AJ‑HPX2100E/AG‑HPX600P/AG‑HPX600EJ/AG‑HPX600EN/AG‑HPX370P/AG‑HPX371E/AG‑HPX372EN/
AG‑HPX374ER/AG‑HPX250P/AG‑HPX250EJ/AG‑HPX250EN/AG‑HPX255P/AG‑HPX255EJ/AG‑HPX255EN
P2 card access LED
Mode check display
microP2 card status
Off
[AUTH NG]
Authentication has not been performed. Writing/reading is
not available. Enter the correct password for authentication
setting.
