Panasonic MCV325 - COMMERCIAL VACUUM, Руководство по обслуживанию

Страница: 9 / 12

-9-
PARTS LIST
(BODY, MOTOR HOUSING, AND MOTOR)… BLOCK
C
Ref. No. Part Name & Description Part No. Quantity Remarks
C – 1 Dust Compartment AC4ØKAGZZUØ1 1 Includes C-47 and C-48 Packing
C – 2 Screw, Handle AMC73B-V3Ø 1 Shipped 10 per package
C – 3 Carry Handle AC64BYUZUØ1 1
C – 4 Support Plate AC43RYUZVØ7 1
C – 5 Tool Holder AC38PYUZUØ1 1
C – 6 Protector Case AC68KJMZVØ6 1
C – 7 Spring, Protector, (Blue) AC7ØKAHHZBØØ 1
C – 8 Protector AC69KJMZVØ6 1
C – 9 Protector Supporter AC18MJMZVØ6 1
C – 10 Switch, On-Off ACØ1EYVZVØ6 1
C – 11 Rubber Protector AC51E4GZUØ1 1
C – 12 Power Cord, (50 Ft.) AC94EAPPZYØ2 1
C – 13 Wire Tie AMC596-7Ø2 1 Shipped 10 per package
C – 14 Shaft, Wheel AC16CUSZØØ 1
C – 15 Washer, Wheel AXWG6E115FY 2
C – 16 Wheel ACØ1CVØZVUB 2
C – 17 Stopper, Wheel AC74SUSZØØ 2
C – 18 Fitting, Handle AMC69B-V3Ø 1
C – 19 Supporter, Handle AMC53B-1LZØØ 1
C – 20 Screw, Handle Supporter AXTN4+2ØBFY 3 Shipped 10 per package
C – 21 Screw, Carry Handle AXTN4+16BFY 2 Shipped 10 per package
C – 22 Screw, Tool Holder AXTN4+16BFY 2 Shipped 10 per package
C – 23 Filter, Secondary AC37KYUZVØØ 1
C – 24 Wire Cord AC37GTCZØØ 1
C – 25 Screw, Grounding AXYN4+E1ØFFY 1 Shipped 10 per package
C – 26 Wire Connector, Switch Area AMC-1CTCE23 2 Shipped 10 per package
C – 27 Lead Wire, (Black) AC44GTDZUØØ 1
C – 28 Switch Cover ACØ3EYU1VØ6 1
C – 29 Screw, Switch Cover AXTN4+16BFY 2 Shipped 10 per package
C – 30 Bumper AC31AYUZVØ7 1
C – 31 Dust Bag AC16KJYZØØ 1
C – 32 Release Button, Dust Cover AC13DYUZVØ7 1
C – 33 Dust Cover AC6ØKBAYZUU1 1
C – 34 Filter Cover AC41KYUZVØ7 1
C – 35 Filter, Electrostatic Exhaust AC3ØKCBYZØØ 1
C – 36 Filter, Motor Case AC38KYUZVØØ 1
C – 37 Motor Case ACØ9FAGZZVØ7 1
C – 38 Screw, Motor Case AXTN4+2ØBFY 4 Shipped 10 per package
C – 39 Motor Assembly AC92FAPNZØØ 1
C – 40 Carbon Brush, Motor AC27FRFZØØ 1 (Set)
C – 41 Motor Support, (Front) AMCØ2F-EØØ 1
C – 42 Motor Support, (Rear) ACØ3FAFYZØØ 1
C – 43 Screw, Motor Flange AXYN4+E1ØFFY 2 Shipped 10 per package
C – 44 Motor Flange AC25SAFYZØØ 1
C – 45 Motor Cover AC93FTEZØU 1
C – 46 Noise Suppressor AC99GAMMZØØ 1
C – 47 Body Packing, ( Left) AC4ØAYUZVØØ 1
C – 48 Body Packing, ( Right) AC39AYUZVØØ 1
C – 49 Wire Connector, Motor Area AMC-1CTCE23 3 Shipped 10 per package
C – 50 Lead Wire Assembly AC99WARGZØØ 1
-16-
NOZZLE HOUSING AND NOZZLE PIPE REPLACEMENT
Removal
1. Remove the lower plate as outlined in the LOWER
PLATE REMOVAL/INSTALLATION section.
2. Remove the belt and agitator assembly as outlined in
the respective sections.
3. Remove the hose from the nozzle pipe and remove the
nozzle pipe by pulling it up out of the nozzle housing.
4. Insert a flat blade screwdriver between the nozzle
housing and the plastic shaft, pry out the plastic shaft as
illustrated, (
Fig. 5 ).
6. Remove the nozzle housing as illustrated, ( Fig 6 ).
7. Remove the handle release assembly, height adjust assembly and
furniture guard ( Fig 7 ).
8. Remove the light cover and window, ( Fig. 7 ) by removing the two (2)
screws from the nozzle housing and pushing out on the light cover.
NOTE: If the motor case cover is removed, DO NOT turn
vacuum over as the motor may fall out.
Installation
1. Install the window, light cover, handle release assembly,
and furniture guard in the new nozzle housing, ( Fig.7 ).
2. Fit the nozzle from the motor shaft side first, and rotate it
into place on the dust container as illustrated, ( Fig. 8 ).
3. Slide the plastic shaft through the nozzle housing and into
the dust container. Make sure that the slot on the bottom of
the plastic shaft is down and fitted onto the projection,
(
Fig. 9 ).
4. Install the height adjust assembly.
5. Replace the nozzle pipe.
6. Install the belt, agitator assembly,
and the lower plate according to the respective instructions.
Plastic
Shaft
Nozzle
Housing
Plastic Shaft
Nozzle
Housing
Projection
Furniture
Guard
Light Cover Screws
Window
Light
Cover
Handle Release
Assembly
(Fig. 6)
(Fig. 7)
(Fig. 9) (Fig. 8)
Flat-head
Screwdriver
(Fig. 5)