Panasonic MCV325 - COMMERCIAL VACUUM, Руководство по обслуживанию

Страница: 7 / 12

-7- -18-
Removal and Replacement
1. Remove the dust cover, dust bag, and the bag supporter.
2. The inside of the suction inlet/hose is snapped over the inside of the dust
compartment. There are four (4) retaining tabs on the suction inlet,
(
Fig. 12) . These four (4) tabs are force fitted into the opening and will have
to be broken off using pliers or a hammer. If a hammer is used, take care
to hit only the retaining tabs. Snap the new suction inlet/hose in place.
Replace all items removed in the reverse order of removal.
SUCTION INLET/HOSE REPLACEMENT
MOTOR PROTECTOR REPLACEMENT
Retaining
Tabs
Retaining
Tabs
(Fig. 13)
Removal
1. Remove the dust cover and dust bag.
2. Remove the motor protector (shown in the C Block inside
the dust compartment) by pushing in, one at a time, on the tabs
that secure it to the dust compartment,
(Fig. 14) . Push the
motor protector out the back of the dust compartment.
3. Once the motor protector is out it can be disassembled for
parts replacement.
Disassembly
1. Holding a pair of needle nose pliers at an angle and in a position where one side of
the pliers is against the locking tab, exert enough pressure on the tab to release it,
(see
Fig.14) .
NOTE: There are two locking tabs present, but only one needs to be released.
For reassembly look at the exploded view in the C Block.
Installation
1. Reinstall the motor protector into the dust compartment by aligning the two tabs, (Fig. 13) , under the top flange with the
slots in the dust compartment and applying pressure until it snaps into place.
(Fig. 14)
Retaining
Tabs
EXPLODED VIEW
(AGITATOR ASSEMBLY)… BLOCK
B-1
B
PARTS LIST
(AGITATOR ASSEMBLY)… BLOCK
B
Ref. No. Part Name & Description Part No. Quantity Remarks
B – 1 Agitator Unit AC84RBRHZØØØ 1
(Fig. 15)
(Fig. 12)
(Fig. 13)