Panasonic MC-SB30JW147, Руководство по эксплуатации

Страница: 28 / 40

EN8
Cleaning Cleaning
Start Start
 
 
AUTO AUTO
：
Automatically adjust
the suction power
according to the amount
of dust detected

Dust sensor lamp
Visual display of rubbish that is not easily
visible to the naked eye
(keratin, dander, mite, etc.)

Idling OFF function
The fl oor nozzle will stop running
automatically when it leaves the fl oor
for more than 5 seconds, and resume
operation when it touches the fl oor again.
• In the idling OFF mode, the dust sensor
lamp (red) fl ashes slowly (at an interval
of approximately 3 seconds).
• The product will automatically turn off
after the idling OFF status is continued
for about 10 minutes.
• To change the setting of the idling OFF
function, refer to “Changing Settings”.
(P. EN16)
 Battery level lamp
• Flashing when battery power is low
(In this state, the lamp will fl ash a few
times when the power is turned off to
remind you to charge in time)
• When there is no power at all, the
lamp will also fl ash a few times when
automatically turning off or restarting,
reminding you to charge in time
• Breathing light reminder when charging
• Flashes quickly when abnormal
• To change the sensitivity of the sensor
lamp, refer to “Changing Settings”.
(P. EN16)
 When changing the suction mode
End End
HIGH HIGH
：
Runs with the strongest
suction power

Gently move the fl oor nozzle during use. Do not press down hard.
(So as not to damage the fl oor)

To prevent scratches, do not use it to clean burnished surfaces, such as piano.
Mutual conversion
per press
Request Request
Off Lighting Flashing Flashing rapidly
Clean A lot of dust