Panasonic MC-SB30JW147, Руководство по эксплуатации

Страница: 36 / 40

EN16
Status of the
dust sensor lamp
Sensor sensitivity
Always on
Ordinary Ordinary
Normally used during
cleaning (preset when
purchased)
Fast fl ashing
(2 to 3 times in
1 second)
Meticulous Meticulous
Use during careful cleaning
• It will increase the
sensitivity, allowing the
sensitive detection of tiny
garbage. The dust sensor
lamp fl ashes fast.
Flash
(about 1 every
2 seconds)
Easy Easy
When you are tired of the
lighting up of the dust sensor
lamp
• Reduce sensitivity and
suppress fl ashing
Change Settings Change Settings

When changing the sensitivity setting of the
dust sensor lamp

When changing the setting of the idling OFF
function
(The following indicates the current setting status)
Press and hold , then press , Then
release and keep pressing for more
than 5 seconds
1
1
1
2
2
2
3
Press to select the sensitivity according to
your preference
Press (to complete the setting), and
will be (off)
• The current settings can be memorized
until the next setting change.
When the [AUTO] mode is enabled, the fl oor
nozzle leaves the fl oor
• After about 5 seconds, the operation stops and
the dust sensor lamp (red) fl ashes slowly.
When the [AUTO] mode is enabled, the fl oor
nozzle leaves the fl oor
Press (more than 2 seconds)
(This product stops running, the dust sensor
lamp (red) fl ashes slowly, and the setting is
completed)
• The current settings can be memorized until
the next setting change.
Press (more than 2 seconds)
(The dust sensor lamp (red) goes out, the
product starts to operate again, and the setting
is completed)
• When this product is running, even if the
idling OFF function is disabled, the suction
power will become weaker to lower the power
consumption when the fl oor nozzle is kept
away from the fl oor.
• The current settings can be memorized until
the next setting change.
(Always on) (Fast fl ashing) (Flashing)
Disable the idling OFF function Disable the idling OFF function
Enable the idling OFF function Enable the idling OFF function