Panasonic MC-RSC10, Руководство по эксплуатации

Страница: 17 / 64

Clean the entire room automatically!
AUTO mode
The main unit identifies the walls and center of the room and cleans the whole
room by automatically changing its directions.
The main unit adjusts the suction power and moving speed when rubbish is
detected by the house dust sensor.
The main unit performs thorough cleaning when it detects a corner.
●
When the cleaning is finished, the main unit will
automatically return to the charging base.
( If it does not, return it to the charging base manually
by hand or by pressing
)
●
The operating time will vary depending on the room
size and the amount of rubbish.
Depending on the location of the charging base, the
furniture arrangement and the amount of rubbish, the
operating time may vary even if the room size is the
same.
(AUTO mode: Up to approx. 50 mins.)
(LOW mode: Up to approx. 60 mins.)
●
If the battery gets low during operation and
starts flashing, the main unit will stop cleaning and
return to the charging base.
Request
●
Please empty the dust box more frequently when you
are using the LOW mode. (P.EN18)
Vacuum quieter than the AUTO mode!
LOW mode
The main unit cleans slower and quieter than the AUTO mode.
The operating time will be longer than the AUTO mode.
Clean the specified spot only!
SPOT mode
With the start position as the center, the main unit first cleans outwards in
a swirling manner; and when the diameter reaches approx. 1.2 m, the unit
cleans inwards in a swirling manner before returning to the center.
• Depending on the floor surface conditions (e.g. carpets), the actual cleaning
path may be deviated.
• When there are obstacles, the main unit cleans the room while avoiding the obstacles resulting in movements
different from the diagram.
• The timer function is unavailable for this mode.
●
When the cleaning is finished, get the main unit
back to the charging base manually by hand or by
pressing .
Note
●
Depending on the usage conditions, the main unit
may not be able to return to the charging base
even if you press
. (P.EN27)
●
Close the door if you do not want the main unit to go into
other rooms.
Request
●
The main unit cannot detect obstacles while moving backwards,
so a collision can occur.
●
The main unit can start cleaning anywhere, not just from the
charging base.
●
The main unit avoids the charging base while it is cleaning.
Note
Cleaning complete!
Start cleaning!
●
The main unit automatically adjusts the suction power
based on the house dust sensor. When there is a lot
of rubbish, the main unit will move slowly for thorough
cleaning.
Red Blue Red
(Solid on)
Clean
(Solid on) (Flashing)
Dirty
During cleaning, the dust detector lamp
comes on and finds the dust that you can’t see.
( It can even detect microscopic house dust including pollen)
●
The lamp does not come on when the main unit is
returning to the charging base.
Note
Dust detector lamp
2
Start
Press
Press
Press
w
ill c
ome
on
w
he
n t
he
d
us
t b
ox
is
fu
ll.
P
le
as
e e
m
p
ty
th
e d
us
t b
ox
.
(
P.EN18
)
EN15
Cleaning