Side brush
Side brush
Maintenance
Maintenance
(continued)
(continued)
When garbage is wrapped/When deemed necessary
When garbage is wrapped/When deemed necessary
Before performing any maintenance, turn off the main power switch and unplug the power plug from the AC adapter
Remove any hair or other foreign object that has been
tangled in the brush
If the side brushes stop turning or turn with difficulty,
remove the rotating brush (P. EN18), and clean the
side brushes (the side brushes can be cleaned easily
if you remove the rotating brush)
Soak a cloth in hot water, wrap the cloth around
the side brush for about 10 seconds, then pull
on the bristles
Remove the side brushes to remove rubbish
Remove the side brushes to remove rubbish
Also remove the
dust from the
reverse side
Ensure that you have the correct side for
each side brush
Push fi rmly into place and screw into place
While holding down
the side brush
Unscrew with a
screwdriver
Side brush (L)
If the bristles of the side brushes curl or spread out
Side brush
(hold base
in place)
Remove the side brushes
Remove the side brushes
1
2
To attach
After washing in water
• Remove any water and dry properly (not doing so may cause odour and blockage)
• Please do not use blow dryer or similar device to dry it (this can cause deformation and malfunction of
the rotating brush)
Please do not use substances such as detergent, bleach, gasoline, thinner, or alcohol (to avoid cracks
and colour change)
The side brushes collect hair and waste easily, so check regularly and perform maintenance as necessary
Request
The side brushes are replaceable. They wear down at different rates according to the type of floor they
are being used on.
Replace the side brushes when bristles start coming out or they get damaged.
Purchase replacement side brushes (sold separately) at the place where you purchased the unit.
Note
Screw
Side brush (R)
Remove rubbish from
Remove rubbish from
areas
areas
Remove rubbish from
Remove rubbish from
areas
areas
20
