Press the
of the main unit or the
of the Remote controller
Start cleaning
Finish cleaning
• Close the door if you do not want the unit to go into other rooms.
• It cannot sense an obstacle when retreating, so a collision may occur.
• The unit can start cleaning anywhere, not just from the charging base.
• The unit avoids the charging base when it is cleaning.
• The main unit stops operation if you lift it during cleaning.
• The house dust detector lamp does not light in these three cleaning modes.
Remote controller
Remote controller
Press
Remote controller
Remote controller
Press
Remote controller
Remote controller
Press
Request
Note
Note
• Depending on the cleaning environment, the actual cleaning path may be deviated.
Approx.1 m
The main unit automatically goes
straight to the wall, and then clean
along the wall. When detecting a
corner, it repeats the corner
cleaning. When the cleaning is
completed, it automatically returns
to the charging base for charge.
With the start position as the center,
the vacuum cleaner fi rst cleans
outwards in a swirling manner; and
when the diameter has reached
approximately 1 m, the cleaner
cleans inwards in a swirling manner,
and then returns to the center and
automatically stops.
The vacuum cleaner stays in the
range of 1 m
×
1 m from the start
position , and cleans in an arc
cross manner. It automatically
stops after it fi nishes cleaning.
Borderline mode
Borderline mode
Spot mode
Spot mode
Arch mode
Arch mode
Cleaning Pattern
：
Start position
：
Start position
：
Start position
Cleaning
Cleaning
(continued)
(continued)
Cleaning Pattern
Cleaning Pattern
When the cleaning is finished, please return the main unit to the charging base
(manually get it back to the charging base or press the Home button).
If the battery is low during cleaning, the main unit will issue a sound of beep, the status display lamp
will flash, and the cleaner will automatically return to the charging base.
14
