15
Other operations
Other operations
Use the direction buttons on the remote controller to move the unit to the
place you want to clean. (The unit cleans as you are moving it)
…
Forward
…
Turn left
…
Turn right
●
You can also use the Home button to
return the unit to the charging base.
When using the remote controller
When using the remote controller
• The remote controller can be used within a range of about 5 m
• Point the infrared transmitter of the remote controller at the infrared receiver
of the main unit
• Make sure there are no obstacles to the signal between the remote
controller and the main unit
• Don
＇
t cover the infrared transmitter of the remote controller with your finger
• To switch between different cleaning modes, you need to press
To switch between different cleaning modes, you need to press
to stop
to stop
the original mode, then press the corresponding mode button
the original mode, then press the corresponding mode button
Operate (the unit moves only while you are
Operate (the unit moves only while you are
pressing the button)
pressing the button)
• Depending on the usage conditions, the unit may not
be able to return to the charging base even when you
have pressed Home button. (P. EN24)
• The house dust detector lamp does not light when the unit
is returning to the charging base.
(but the rotating brush and the side brush will still turn)
• You can move the main unit using the remote controller
even when it is cleaning.
(In automatic, thorough or borderline modes)
• When returning the main unit to charge, you can make it
back to the charging base more quickly by combining with
the remote controller arrow buttons.
Return to charging base
Note
Note
Using the remote controller
Using the remote controller
U
sa
ge
Usage
•M
ain
te
na
nc
e
Maintenance
