Panasonic MC-CG523K147-AE, Руководство по обслуживанию

Страница: 8 / 13

8
5.3. Disassembly of Cord Reel Unit
Step 1 Pull up the Cord Reel Unit.
Step 2 Remove 2 Connector Wires from Rail Base Unit.
Step 3 Release Printed Circuit Board (PCB) from catches.
5.4. Disassembly of Rail Base Unit
Step1 Remove the Cord Reel Unit from Rail base Unit by insert
a slotted screwdriver into the shaft of the Cord Reel Unit and
turning it 90

counter-clockwise.
Step 2 Remove the Cord Reel Unit from the Rail Base Unit.
To assemble:
Step 1
Assemble in reverse order of the disassembly.
Step 2 Pretension the Cord Reel Unit.
-Turn the Cord Reel Unit holding on the plug
-Number of turns for pretension of the Cord is engraved on the
steel at the side of Cord Reel Unit.