Panasonic MC-BJ980, Руководство по эксплуатации

Страница: 8 / 36

Battery Status
Remaining battery level can be checked by the
following steps.
1
Pull out the plug from the port of the vacuum
cleaner.
2
Turn on the vacuum cleaner.
Battery Status Indicator
When battery status indicator is lighting the
battery power level is OK.
When battery status indicator is blinking the
battery needs to be charged before further use.
Lighting
CHECK
Blinking
CHECK
Battery Status
Indicator
CHECK
The battery is consumables.
- The run time reduces as you continue to repeatedly
use the unit. The life of the battery depends on
factors such as the ambient temperature, and
amount of time it has been used, and the length of
charge/discharge cycles will become shorter
depending on usage conditions.
- If the run time reduces significantly even after
proper recharging, it means the battery has
reached the end of its service life. Please contact
to the retailer where you purchased this vacuum
cleaner.
Anti-idling Function
The agitator will stop functioning/working when
the nozzle is lifted up for more than 5 sec.
It will restart when the nozzle is lowered onto the
fl oor.
- The dust sensor lamp is blinking slowly in red
(about 3-second intervals) when the anti-idling
function is working.
- After the anti-idling function has continued for about
10 minutes, vacuum cleaner will be turned off
automatically.
Changing the setting of the anti-idling
function
To deactivate the anti-idling function
1
Lift the power nozzle at “AUTO” position.
- After about 5 seconds the operation is stopped,
and the dust sensor lamp is blinking slowly in red.
2
Press
AUTO
HIGH
LONG
(more than 2 sec.)
(When the dust sensor lamp lights up in blue
and the operation is resumed, the setting is
completed.)
To activate the anti-idling function
1
Lift the power nozzle at “AUTO” position.
2
Press
AUTO
HIGH
LONG
(more than 2 sec.)
(When the operation is stopped and the dust
sensor lamp is blinking slowly in red, the
setting is completed.)
How To Use The Vacuum Cleaner
EN6