18. Materials
554
0
Insufficient card write speed for video, 6K/4K photo, or Post-Focus recording.
Use a card of a supported Speed Class. (
0
If the recording stops even when you are using a card that meets the specified
Speed Class rating, the data writing speed of the card is getting slow.
We recommend backing up data, and formatting (
0
Depending on the type of card, recording may stop part way.
0
The card door or battery door is opened while writing to a card. Wait until writing is
finished, then turn the camera off and remove.
Lens
0
Remove the lens once, and then attach it again without pressing the lens release
button. (
Turn on the camera again, and if it is still displaying, contact the dealer.
0
Remove the lens from the camera body and gently wipe the contacts on the lens and
the camera body using a dry cotton swab.
Attach the lens, turn on the camera again, and if it is still displaying, contact the
dealer.
Battery
0
Use a genuine Panasonic battery.
If this message is displayed even when a genuine Panasonic battery is used, contact
the dealer.
0
If the terminal of the battery is dirty, remove the dirt and dust from the terminal.
[Recording was cancelled due to the limitation of the writing speed of
the card]
[Now writing]
[The lens is not attached properly. Do not push lens release button
while lens is attached.]
[Lens attachment failed. Please make sure the lens is attached
correctly.]
[This battery cannot be used]
