2. Getting Started
49
Card Access Indications
The card access light turns on while the
card is being accessed.
Removing a Card
1
Open the card door.
0
Check that the card access light
A
is
turned off and then open the card door.
2
Push the card until it clicks and then
pull the card out straight.
0
You can set the way to record to card slots 1 and 2:
[
]
¨
[
]
¨
[Double Card Slot Function] (
0
The card may be warm just after the camera has been used. Be careful when
removing.
0
Do not perform the following operations during access.
The camera may operate incorrectly or the card and recorded images
may be damaged.
– Turn off the camera.
– Remove the battery or card or disconnect the power plug.
– Subject the camera to vibration, impacts, or static electricity.
0
You can set so that the card access light does not turn on:
[
]
¨
[
]
¨
[Card Access Light] (