9. Flash
236
[Flash Synchro]
When a moving subject is recorded at night using a slow shutter and flash,
a trail of light may appear in front of the subject.
If you set [Flash Synchro] to [2ND], you can take a dynamic picture with a
trail of light appearing behind the subject by firing the flash immediately
before the shutter closes.
¨
[
]
¨
[
]
¨
Select [Flash
Synchro]
0
[
] is displayed on the recording screen.
0
For information about adjusting the flash output when recording using a
wireless flash, refer to page
0
[Flash Adjust.] cannot be used when the following are set:
– [Firing Mode]: [MANUAL]
– [Wireless]: [ON]
0
You can register functions to Fn buttons:
[
]
¨
[
]
¨
[Fn Button Set]
¨
[Setting in REC mode]
¨
[Flash Adjust.]