![background image](http://html.mh-extra.com/html/panasonic/lumix-dmc-tz60/lumix-dmc-tz60_basic-operating-instructions-manual_1510163352.webp)
Others
Q&A Troubleshooting
VQT5E85
- 312 -
About the Wi-Fi function (continued)
I cannot display or delete the images uploaded to the WEB service by this unit.
●
The images uploaded to the WEB service cannot be displayed or deleted by this unit.
→ Perform the task using a smartphone or a PC.
Your “LUMIX CLUB” login ID and password were deleted after sending the camera in to
be repaired.
●
The settings stored in the camera may be deleted depending on the type of repair.
→ Always make a copy of important settings.
There is an image that could not be transmitted.
●
Is the size of the image too large?
→ Divide the motion picture using [Video Divide]
.
→ Reduce the image size at [Size]
, and then send.
●
Capacity or number of images in the WEB service is full.
→ Login to “LUMIX CLUB”, and check the status of the destination on the WEB service link settings.
I have forgotten the password for the Wi-Fi.
→ Execute the [Reset Wi-Fi Settings] in the [Setup] menu.
However, the information you have set on the [Wi-Fi Setup] menu will be reset.
Transmission of the image fails midway.
●
Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide]
.
→ Reduce the image size at [Size]
, and then send.
→ Image cannot be transmitted when the battery indicator is flashing red.
Motion picture cannot be transmitted.
●
File format of the motion picture that can be sent differs depending on the destination.
(→202, 209, 211, 216, 222, 227)
●
Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide]
.
I cannot send images to an AV device.
●
Sending may fail depending on the operational status of the AV device.
Also, sending may take a while.
I cannot connect using the NFC function.
●
The smartphone is not NFC compatible.
This function can be used with NFC compatible devices with Android (2.3.3 or above).
●
Is the NFC function on the smartphone turned off?
●
The [NFC Operation] on this unit is set to [OFF].
●
The camera has a hard time recognising some smartphone models. If it is not recognised, slowly
shift the smartphone while it is beside the unit.