- 93 -
Recording
2
Press
3
/
4
to select [Start Shooting] and then press [MENU/SET].
3
Press the shutter button fully.
• The recording starts automatically.
• If the recording interval is set to 40 seconds or more, this unit will turn off automatically while in
recording standby. [Time Lapse Shot] is continued even with this unit turned off. When the
recording start time arrives, this unit turns on automatically. To turn on this unit manually, press
the camera [ON/OFF] button or press and hold [
(
].
• To stop the Time Lapse Shooting partway through, press [MENU/SET] or [
(
] while this unit
turned on, and end the recording on the displayed confirmation screen.
• This function is not for use in a security camera.
• If you leave the unit somewhere to perform [Time Lapse Shot], please be careful of theft.
• Recording for long periods in cold places such as ski resorts or places at high altitude, or in
warm, wet environments may cause a malfunction, so please be careful.
• When the recording interval is set to a value of less than 1 minute and the previous recording has
not finished yet, recording may be skipped.
• We do not recommend using [Time Lapse Shot] while underwater.
• When the recording warning is set to [ON], a warning sound will be emitted. Check this setting is
suitable for the recording environment.
• The unit is fixed to the zoom position prior to the start of recording.
• We recommend to use a fully charged battery.
• In situations that require longer recording time such as when recording in [Starry Sky] of the Scene
Mode or when recording in a dark place, we recommend you use an AC adaptor (optional).
• [Time Lapse Shot] will be canceled partway through in the following cases.
– When the charge on the battery runs out
– When the number of recordable pictures drops to none
• Do not connect the AV cable (optional) or the USB connection cable (supplied) during Time Lapse
Shooting.
