Panasonic Lumix DMC-L10, Руководство по эксплуатации, Страница: 68 / 160

Advanced
68
VQT1G28
Adjust the flash output when the subject is
small or reflection ratio is extremely high or
low.
1
Press [MENU/SET] to display the
menu.
2
Press
3
/
4
/
2
/
1
to select
[FLASH ADJUST.] in the [REC]
menu [
] and then press
1
.
3
Press
2
/
1
to adjust the flash
output and then press [MENU/SET].
• Select [0] to return to the original flash
output.
• You can also use the front dial or the
rear dial to set.
4
Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
• You can adjust from [
`
2 EV] to [
_
2 EV] in
steps of [1/3 EV].
• If you adjust the flash output, the adjusted
flash output value is displayed on the LCD
monitor. Also, [
] is displayed on the
Viewfinder.
• The flash output setting is memorized
even if the camera is turned off.
2nd curtain synchro activates the flash just
before the shutter closes when taking
pictures of moving objects such as cars
using a slow shutter speed.
1
Press [MENU/SET] to display the
menu.
2
Press
3
/
4
/
2
/
1
to select
[FLASH SYNC.] in the [REC]
menu [
] and then press
1
.
3
Press
4
to select [2ND] and then
press [MENU/SET].
• You can also use the front dial or the
rear dial to select a menu item.
4
Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
∫
1st curtain synchro
• The normal method when taking
pictures with the flash.
Adjusting the flash output
MENU
/SET
Setting to the 2nd Curtain Synchro
MENU
/SET
2560
19
1/25 F2.8
P A
VQT1G28ENG_L10KP.book 68 ページ ２００７年９月６日 木曜日 午前９時２９分