Panasonic Lumix DMC-L10, Руководство по эксплуатации, Страница: 124 / 160

Connecting to other equipment
124
VQT1G28
Playing Back Pictures
on a TV Screen
∫
Playing back pictures using the Video
cable (supplied)
• Set the [TV ASPECT]. (P31)
• Turn the camera and the TV off.
1
Connect the video cable
A
to the
[V. OUT] socket on the camera.
• Connect the video cable with the [ ]
mark facing the [
2
] mark on the
[DIGITAL] socket.
• Hold the video cable at
B
and insert
straight in or take straight out.
2
Connect the video cable to the
video input socket on the TV.
•
1
Yellow: to the video input socket
3
Turn the TV on and select external
input.
4
Turn the camera on and then
press [
].
• Do not use any other Video cables except
the supplied one.
• Press [ ] to display pictures on the TV.
You can display pictures on the TV only
when they are being displayed on the LCD
monitor.
• The top and bottom or left and right of the
picture may be cut off slightly when it is
displayed due to the characteristics of the
TV.
• Depending on the screen mode setting of
the TV when you connect the camera to a
wide-screen TV or a high-definition TV,
the picture may be stretched horizontally
or vertically and the top and bottom or left
and right of the picture may be cut off
when it is displayed. In this case, change
the screen mode setting.
• Read the operating instructions for the TV.
• When you play back a picture vertically, it
may be blurry.
• You can view pictures on TVs in other
countries (regions) which use the NTSC
or PAL system when you set
[VIDEO OUT] in the [SETUP] menu.
• Even if you set [VIDEO OUT] to [PAL], the
output signal will still be NTSC in the
recording mode.
∫
Playing back pictures on a TV with an
SD Card slot
Still pictures recorded on an SD Card or an
SDHC Memory Card can be played back
on a TV with an SD Memory Card slot.
• Depending on the TV model, pictures may
not be displayed on the full screen.
• You may not be able to play back
MultiMediaCards.
1 1 1
A
B
VQT1G28ENG_L10KP.book 124 ページ ２００７年９月６日 木曜日 午前９時２９分