11. Using the Wi-Fi function
288
1
Select the menu.
2
Select [Via Network], and connect.
(P295)
3
Check the send settings, and select [Set].
•
To change the send setting, press [DISP.].
(P302)
4
Take pictures.
•
To change the setting or disconnect, press [Wi-Fi].
(P258)
You cannot change the settings while sending pictures. Wait until sending is complete.
(You can also terminate the connection by performing the following operations:
→
[Setup]
→
[Wi-Fi]
→
[Wi-Fi Function]
→
[Yes])
1
Select the menu.
2
Select [Via Network], and connect.
(P295)
3
Check the send settings, and select [Set].
•
To change the send setting, press [DISP.].
(P302)
4
Select [Single Select] or [Multi Select].
Sending an image each time a recording is made ([Send Images While
Recording])
>
[New Connection]
>
[Send Images While Recording]
>
[Cloud
Sync. Service]
Select and send the images ([Send Images Stored in the Camera])
>
[New Connection]
>
[Send Images Stored in the Camera]
>
[Cloud
Sync. Service]
[Single Select] setting
1
Select the picture.
2
Select [Set].
[Multi Select] setting
1
Select the picture. (repeat)
•
The setting is canceled when the picture is selected
again.
2
Select [OK].
•
The number of pictures that can be sent by [Multi
Select] is limited.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
•
To change the send settings on a screen that is displayed after the image has been sent,
press [DISP.]. To terminate the connection, select [Exit].
Wi-Fi
MENU
Wi-Fi
6HW
2.
