11. Using the Wi-Fi function
272
1
Select the menu.
2
Select [Via Network] or [Direct], and connect.
(P294)
3
Select a device you want to connect.
4
Check the send settings, and select [Set].
•
To change the send setting, press [DISP.].
(P302)
5
Take pictures.
•
The pictures are sent automatically after taking them.
•
To change the setting or disconnect, press [Wi-Fi].
(P258)
You cannot change the settings while sending pictures. Wait until sending is complete.
(You can also terminate the connection by performing the following operations:
>
[Setup]
>
[Wi-Fi]
>
[Wi-Fi Function]
>
[Yes])
Sending an image each time a recording is made ([Send Images While
Recording])
>
[New Connection]
>
[Send Images While Recording]
>
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1
Turn on the Wi-Fi function.
2
Select the wireless access point you want to connect to, and set.
3
Start “Image App”.
(P261)
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]:
1
Start “Image App”.
(P261)
When connecting with [Manual Connection] in [Direct]:
1
Turn on the Wi-Fi function.
2
Select the SSID that matches the one displayed on the screen of this unit, and
then enter the password.
3
Start “Image App”.
(P261)
Wi-Fi
MENU
