259
11. Using the Wi-Fi function
∫
Describing method
When
“select [Select a destination from History]”
, etc.
is described in a step, perform any of the following
operations.
•
The camera cannot be used to connect to a public wireless LAN connection.
•
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
•
We strongly recommend that you set an encryption to maintain information security.
•
It is recommended to use a fully charged battery when sending images.
•
When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted.
(A message such as [Communication error] is displayed.)
•
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
•
Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.
•
Do not remove the memory card or battery or move to an area without any reception
while sending images.
•
The monitor display may become distorted for an instant while connected to the service,
however this will not affect the image being sent.
Button operation:
Select [Select a destination from
History] with the cursor button, and
then press [MENU/SET].
Touch operation:
Touch [Select a destination from
History].
