Panasonic Lumix DMC-G1KPP, Руководство по обслуживанию

Страница: 35 / 79

35
• 5. How to read the error code:
One error code is displayed for 8 bit, the contents of error codes is indicated the table as shown below.
About "*" indication in the above table:
The third digit from the left is different as follows.
- In case of 0 (example: 18 0 01000)
When the third digit from the left shows “0”, this error occurred under the condition of INITIAL SETTINGS has been com-
pleted.
It means that this error is occurred basically at user side.
- In case of 8 (example: 18 8 01000)
When the third digit from the left shows "8", this error occurred under the condition of INITIAL SETTINGS has been
released.
(Example; Factory assembling-line before unit shipment, Service mode etc.)
It means that this error is occurred at service side.
• 6. How to returned to Normal Display:
Turn the power off and on, to exit from Error code display mode.
NOTE:
The error code can not be initialized.
Attribute Main item Sub item Error code Contents
High 4 bits Low 4 bits
LENS Lens Communication 18*0 0000
|
FFFF
Lens communication error.
HARD VENUS A/D Flash 28*0 0000 Flash charging capacitor did not been fully charged within 20 seconds.
FLASH ROM Data Area 2B*0 0001 Flash ROM data reading error is detected when the unit turns ON.
0002 Flash ROM data writing error is detected when the unit turns OFF.
Program Area 0005 Firmware update error.
SYSTEM IC Initialization 2C*0 0001 Clock IC initialization failure error.
SOFT CPU Reset 30*0 0001
|
FFFF
System error (NMI reset).
Recording
Media
SD Memory
Card
31*0 0001 SD memory card logic error.
SD memory card format error.
When it is detected, [MEMORY CARD ERROR FORMAT THIS CARD?]
is displayed on the screen.
0002 SD memory card physical error.
During formatting the SD memory card, there is no response from the
card.
If the mini-SD memory card is used, check the SD memory card adaptor.
0004 SD memory card writing error.
Check the SD memory card. It might be damage one.
Lens ZOOM 3C*0 0000 Zoom process does not be completed.
Camera System 3B*0 0000 Initialization failure.
3E*0 0001 Exposure charging operation failure.
0002 Failure of the returning operation to the home position.
System System 35*0 0001
|
FFFF
System error.
35*1,
35*2
0000 System error (in recording pre-process).