Panasonic Lumix DMC-G1KPP, Руководство по обслуживанию

Страница: 2 / 79

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precaution ------------------------------------------------- 3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.) --------3
1.4. How to Discharge the Capacitor on Flash Sub
PCB------------------------------------------------------------4
2 Warning -------------------------------------------------------------- 5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord(For EB/GC/GH) -----------------6
2.4. How to Replace the Lithium Battery -------------------7
3 Service Navigation ------------------------------------------------ 8
3.1. Introduction --------------------------------------------------8
3.2. Important Notice --------------------------------------------8
3.3. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------9
3.4. How to Define the Model Suffix (NTSC or PAL
model)------------------------------------------------------- 10
4 Specifications ---------------------------------------------------- 13
5 Location of Controls and Components ------------------ 14
6 Service Mode ----------------------------------------------------- 34
6.1. Error Code Memory Function ------------------------- 34
7 Troubleshooting Guide ---------------------------------------- 36
8 Service Fixture & Tools --------------------------------------- 39
8.1. Service Fixture and Tools ------------------------------ 39
8.2. Clean Box -------------------------------------------------- 40
8.3. Service Position ------------------------------------------ 41
9 Disassembly and Assembly Instructions --------------- 42
9.1. Disassembly Flow Chart-------------------------------- 42
9.2. PCB Location---------------------------------------------- 42
9.3. Disassembly Procedure -------------------------------- 43
9.4. Disassembly and Assemble Procedure for the
Lens --------------------------------------------------------- 51
10 Measurements and Adjustments -------------------------- 54
10.1. Matrix Chart for Replaced Part and Necessary
Adjustment ------------------------------------------------- 54
11 Maintenace -------------------------------------------------------- 55