Panasonic Lumix DMC-FZ18E, Руководство по обслуживанию

Страница: 36 / 51

S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Block Diagram .......................................................................... S-2
S2.1. Overall Block Diagram .......................................................... S-2
S3. Schematic Diagram .................................................................. S-3
S3.1. Interconnection Diagram ....................................................... S-3
S3.2. AF LED/Mic Schematic Diagram ........................................... S-4
S3.3. CCD Flex Schematic Diagram .............................................. S-4
S3.4. Lens Flex Schematic Diagram .............................................. S-5
S4. Print Circuit Board .................................................................... S-6
S4.1. AF LED/Mic P.C.B. ................................................................ S-6
S4.2. CCD Flex P.C.B. .................................................................... S-7
S4.3. Lens Flex P.C.B. .................................................................... S-8
S5. Replacement Parts List ............................................................ S-9
S6. Exploded View ....................................................................... S-14
S6.1. Frame and Casing Section (1) ............................................ S-14
S6.2. Frame and Casing Section (2) ............................................ S-15
S6.3. Packing Parts and Accessories Section .............................. S-16
Table of contents
Service Manual
DSC0708030CE
Diagrams and Replacement
Parts List
Vol. 1
(S)...........Silver Type (except PL/GD/GT/SG)
Colour
(K)...........Black Type
Model No.
DMC-FZ18P
DMC-FZ18PC
DMC-FZ18PL
DMC-FZ18EB
DMC-FZ18EE
DMC-FZ18EF
DMC-FZ18EG
DMC-FZ18E
DMC-FZ18GC
DMC-FZ18GD
DMC-FZ18GK
DMC-FZ18GN
DMC-FZ18GT
DMC-FZ18SG
Digital Camera
Name of Signal
OFTR FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice