Panasonic Lumix DMC-FZ18E, Руководство по обслуживанию

Страница: 21 / 51

21
7.2. Clean Box
7.2.1. Servicing the Lens unit.
To keep dustproof environment when repairing lens unit, CLEAN BOX is recommended (less than class 10,000 Federal Standard
209D).
7.2.2. Introduction of Clean box.
One of our recommended clean box is as shown below.
It consists of "Air clean unit" and "Clean hood".
As for the "Air clean unit", refer to the "Jig Information" on the “Support Information from NWBG/VDBG-PAVC” web-site in “TSN
system”.
7.3. When Replacing the Main PCB
After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in
“TSN system”, together with Maintenance software.
7.4. Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No. Parts No. Connection Form
1 VFK1951 FP9001 (MAIN) - CCD UNIT 39PIN 0.3 FFC
2 VFK1364 FP9002 (MAIN) - TOP OPERATION UNIT 14PIN 0.5 FFC
3 RFKZ0363 FP9003 (MAIN) - LCD UNIT 19PIN 0.5 FFC
4 VFK1443 FP9004 (MAIN) - EVF UNIT 18PIN 0.5 FFC
5 VFK1953 FP9005 (MAIN) - LENS FPC UNIT 40PIN 0.5 FFC
6 VFK1974 FP9006 (MAIN) - LCD UNIT 4PIN 0.5 FFC
7 VFK1480 FP9007 (MAIN) - EVF UNIT 6PIN 0.5 FFC
8 VFK1480 FP9008 (MAIN) - AF LED/MIC UNIT 6PIN 0.5 FFC
9 RFKZ0359 P9003 (MAIN) - FLASH UNIT 2PIN CABLE
10 VFK1576DC202 P9004 (MAIN) - FLASH UNIT 2PIN CABLE
11 VFK1576DC202 P9005 (MAIN) - FLASH UNIT 2PIN CABLE