Panasonic Lumix DMC-FZ18E, Руководство по обслуживанию

Страница: 19 / 51

19
About “*” indication in the above table:
The third digit from the left is different as follows.
- In case of 0 (example: 18
0
01000)
When the third digit from the left shows "0", this error occurred under the condition of INITIAL SETTINGS has been
completed.
It means that this error is occurred basically at user side.
- In case of 8 (example: 18
8
01000)
When the third digit from the left shows "8", this error occurred under the condition of INITIAL SETTINGS has been
released.
(Example; Factory assembling-line before unit shipment, Service mode etc.)
It means that this error is occurred at service side.
•
6. How to returned to Normal Display:
Turn the power off and on, to exit from Error code display mode.
NOTE:
The error code can not be initialized.
SOFT CPU Reset 30*0 0001
I
0007
NMI reset
Non Mask-able Interrupt
(30000001-30000007 are caused by factors)
Card Card 31*0 0001 Card logic error
SD card data line or IC6001 (VENUS 3)
0002 Card physical error
SD card data line or IC6001 (VENUS 3)
0004 Write error
SD card data line or IC6001 (VENUS 3)
39*0 0005 Format error
SD card data line or IC6001 (VENUS 3)
CPU, VENUS
hard
Stop 38*0 0001 Camera task finish process time out.
Communication between Lens system and IC6001 (VENUS 3)
0002 Camera task invalid code error.
IC6001 (VENUS 3)
0100 File time out error in recording motion image
IC6001 (VENUS 3)
0200 File data send error in recording motion image
IC6001 (VENUS 3)
0300 Single or burst recording brake time out.
Operation Power on 3B*0 0000 FLASHROM processing early period of camera during movement.
Zoom Zoom 3C*0 0000 Zoom lens processing is incomplete.
Zoom lens, IC7001
35*0 0000 When "BKI" and/or "WKI" adjustment is perfomed,
this code may be registered by chance.
No remedy is required.
35*1 0000 Software sequence error.
Connector is unlocked. /Flex cable is damaged.
35*2 0000 Software sequence error.
Connector is unlocked. /Flex cable is damaged.
Group Main item Sub item Error code Error Description (Upper frame)
Upper 4 bits Low 4 bits Remedy/Check point (Lower frame)