Others
- 156 -
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
>
Decrease the ISO sensitivity.
(P90)
>
Increase the setting for [NOISE REDUCTION] in [PICT.ADJ.] or lower the setting for each of
the items other than [NOISE REDUCTION].
(P98)
>
Take pictures in bright places.
•
Has [HIGH SENS.] or [HI-SPEED BURST] in the scene mode been set? If so, the resolution of
the recorded picture decreases slightly because of high sensitivity processing, but this is not a
malfunction.
•
If recording under fluorescent light, the brightness or the hue may change slightly when the shutter
speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction.
•
Are you using a MultiMediaCard? This unit does not support MultiMediaCards.
>
When you set the picture quality to [
÷
], [
ý
], [
ü
], or [
ÿ
], we recommend using a
high-speed card with “10MB/s” or greater displayed on the package.
•
Depending on the type of the card, recording may stop in the middle.
>
Touch a subject-specific colour if the subject has a different colour from the periphery.
(P61)
•
It is possible that the subject may be warped slightly, or the borders get coloured, depending on
the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the
image might look warped because the perspective is enhanced when the wide angle is used.
This is not a malfunction.
The recorded picture looks rough.
Noise appears on the picture.
The brightness or the hue of the recorded picture is different from the actual
scene.
A reddish vertical line (smear) appears on the LCD monitor during picture-taking.
•
This is a characteristic of CCDs, and it appears when the subject has a
bright part. Some unevenness may occur in the surrounding areas, but
this is not a malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
•
It is recommended that you take pictures while taking care not to expose
the screen to sunlight or any other source of strong light.
Motion picture recording stops in the middle.
Dynamic tracking does not work even after touching the subject.
Lens
Recorded image may be warped, or nonexistent colour is surrounding the
subject.
