55
DVQP1285
Recording mode
Taking pictures with automatic settings (Intelligent Auto Mode)
•When the camera identifies [ ] as the optimal scene and if the camera determines
that jitter is reduced by the use of a tripod or by other means, a shutter speed that
is slower than usual is selected. After pressing the shutter button, do not move the
camera while recording.
•When recording 4K photos or when recording using [Post Focus], Scene Detection
works the same way as when recording motion pictures.
●
Depending on recording conditions, different scene types may be determined for the same
subject.
About Backlight Compensation
Backlight compensation is automatically activated in Intelligent Auto Plus Mode or Intelligent Auto
Mode. Backlight is a condition where a light shines from behind a subject. When there is a backlight,
the subject appears darker and the camera will automatically attempt to correct it by increasing the
brightness of the picture.
Taking pictures using a handheld camera
([iHandheld Night Shot])
Recording mode:
If a night scene is detected automatically while the unit is being handheld, [iHandheld
Night Shot] can record a still picture with less jitter and less noise without using a tripod
by combining a burst of pictures.
→
[Rec
] → [
iHandheld Night Shot]
Settings: [ON] / [OFF]
●
The angle of view becomes narrow slightly.
●
After the shutter button has been pressed, do not move the camera during the burst operation.
●
The flash is fixed to the [ ] (Forced Flash Off) setting.
●
This function will not work for still pictures while motion pictures are being recorded.
●
This function is not available in the following cases:
•In Self Shot Mode
•When using [Burst]
•When recording 4K photos
•When recording using [Post Focus]
•When recording using [Bracket]
•When [Quality] is set to [
], [
] or [ ]
•When using [Time Lapse Shot]
•When [Auto Shooting] of [Stop Motion Animation] is set to [ON]