319
12. Others
∫
Lens
• Remove the lens once, and then attach it again without pressing the lens release button.
Turn on the camera again, and if it is still displaying, contact the dealer.
• Remove the lens from the camera body and gently wipe the contacts on the lens and the
camera body using a dry cotton swab.
Attach the lens, turn on the camera again, and if it is still displaying, contact the dealer.
∫
Battery
• Use a genuine Panasonic battery.
If this message is displayed even when a genuine Panasonic battery is used, contact the
dealer.
• If the terminal of the battery is dirty, remove the dirt and dust from them.
∫
Wi-Fi
• The wireless access point information set on the camera is wrong.
Check the authentication type and encryption key.
• Radio waves from other devices may block the connection to a wireless access point.
Check the status of other devices that are connected to the wireless access point as well as the
status of other wireless devices.
• Radio waves from the wireless access point are getting weak.
Perform the connection closer to the wireless access point.
• Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed.
Reconnect the connection again.
• Change the access point to connect to in the smartphone Wi-Fi settings to the camera.
[The lens is not attached properly. Do not push lens release button while lens is
attached.]
[Lens attachment failed. Please make sure the lens is attached correctly.]
[This battery cannot be used]
[Failed to connect wireless access point]/[Connection failed]/[No destination
found]
[Connection failed. Please retry in a few minutes.]/[Network disconnected.
Transfer stopped.]
[Connection failed]