287
10. Using the Wi-Fi/Bluetooth function
Search for available wireless access points.
• Confirm encryption key of the wireless access point if the network authentication is encrypted.
1
Select the wireless access point.
• To search for wireless access points again, press [DISP.].
• If no wireless access point is found, refer to “Connecting
2
(If network authentication is encrypted)
Enter the encryption key.
• For information on how to enter characters, refer to
∫
Connecting by Manual Input
• Check the SSID, network authentication type, encryption type, and encryption key of the
wireless access point to be connected.
1
On the screen displayed in step
1
of “[From List]”, select [Manual Input].
2
Enter the SSID of the wireless access point you are connecting to, then select [Set].
• For information on how to enter characters, refer to
.
3
Select the network authentication type.
4
(When an option other than [No Encryption] is selected)
Enter the encryption key.
[From List]
[WPA2-PSK]
Supported encryption methods: [TKIP], [AES]
[WPA2/WPA-PSK]
[No Encryption]
—
• Check the wireless access points instruction manual and settings when saving a wireless
access point.
• If no connection can be established, the wireless access point’s radio waves may be too
weak.
Refer to “Message Display”
for details.
• Depending on your environment, transmission speed between the camera and wireless
access point may decrease. In addition, the wireless access point may not be available for
use.
